If the static is only on 1 camera | If the static is on all cameras |
- Check near the camera for one of the common | - Check near the receiver for the source of |
interference sources. | interference. |
- Try moving the camera away from a suspected | - Try moving the receiver away from a |
source, or try moving the suspected source so it’s | suspected source, or turn off the source if |
not between the camera and the receiver. | possible. |
- Try moving closer to the receiver. There is always | - Try raising the receiver’s antenna so it |
more noise at the edges of the receiver’s range. | stands straight up. |
|
|
Resetting Your System
Resetting the camera or receiver will erase any changes and set all values back to the default.
You should only reset your system under the following conditions:
Resetting the camera | Resetting the receiver | |
|
| |
- You are unable to pair the camera to the | - The buttons on the receiver are not | |
responding. | ||
receiver. | ||
- The image on the screen is frozen, and | ||
- The image on the screen is frozen. | ||
resetting the camera did not help. | ||
| ||
|
|
To reset the camera or receiver:
1.Unplug the AC adapter and make sure the power is off.
2.Extend the antenna and locate the hole for the reset button.
3.Insert a small object (like a pencil point or an unbent paper clip) into the hole and gently press in.
4.Reconnect the AC adapter and let the battery charge fully.
20