Getting Started
Connect the Power
1.Connect one AC adapter to the camera’s power input and the other to the receiver’s power input. (The two adapters are exactly the same.)
POWER
button
POWER
button
2.Connect the other end of each adapter to a standard 120 volt AC indoor outlet.
3.Press the Power button on both the receiver and the camera; the bottom light on the left (the Power status light) should turn on.
If... | Try... |
a Power status light | - reconnecting the AC adapter |
doesn’t come on | - seeing if the power outlet is controlled by a wall switch |
|
|
Charge the batteries
The batteries in your camera and receiver will charge whenever the power is connected. Let the batteries charge completely (about 8 hours) before you unplug the camera and receiver to move them around. (You can still use the camera and receiver: just keep them plugged in.)