Uniden UDW-10003 user manual Using Zoom Mode, Understanding Night Vision

Page 11

Using Zoom Mode

The receiver can zoom in so you can see the video better. In zoom mode, the receiver increases the pixel size and focuses on the center of the picture. You will also see the ZOOM icon in the upper right corner of the display.

Normal view (VGA)

1

Zoomed-in view (QVGA)

1

Pan and tilt in zoom mode Once in zoom mode, you can pan and tilt the camera to see the outside edges of the zoomed in area. Use the arrow buttons to pan right and left or tilt up and down.

Pan and tilt features are only

available in zoom mode.

Understanding

Night Vision

The portable camera included with your receiver has 11 infrared LEDs for low-light conditions.

Pan left

Tilt up

Tilt down

Pan right

►The infrared LED automatically turns on when the ambient light gets too dim (around twilight); the LED provides enough light for the camera to capture clear images in deep twilight or under a very bright full moon. (See page 22 for lux specifications.)

►For the best night vision results, place the camera no closer than 1 meter (about 3 feet) and no further than 3 meters (about 10 feet) from the point you want to monitor.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents If You Contact Uniden’s Phone Number What’s in the BoxImportant Safety Instructions Contents Try Connect the PowerGetting Started Charge the batteriesIcon What it means Check the Video SignalWhat the lights mean Learning Your SystemGet to Know the Camera What the buttons doMounting Camera screw brace Post Lock Screw holes Using the camera mountSpeaker Get to Know the ReceiverWhat the connections do Connector Use it toRight Using the MenuUnderstanding Night Vision Using Zoom ModeReducing pixellation Connecting to Your TVSome things to know about pairing cameras Multiple Camera FeaturesPairing Cameras Changing to a Different Camera No SignalSetting Up a Scan To enter quad display Using Quad DisplayIf… Try Solving ProblemsPossible Cause Solution Unstable or Weak SignalWeak signal and video performance Noise or Static Resetting the camera Resetting the receiver Resetting Your SystemAdditional Information Product SpecificationsImage Specification System Specifications Camera ReceiverRecycling and Disposal Information Polymer-Lithium Battery WarningCE Compliance Information FCC Compliance InformationIC Compliance Information One-year Limited Warranty
Top Page Image Contents