Sharp SND-5080 user manual Connecting to the monitor, Ethernet Connection, Power Supply

Page 38

installation & connection

Connecting to the monitor

Connect the [VIDEO] port of the camera to the video input port of the monitor.

MIn the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.

You must set <Video Output> to <ON> before the display screen can be activated. (page 72)

Connect the monitor test cable to the output port of the monitor.

Ethernet Connection

Connect the Ethernet cable to the local network or to the Internet.

Power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.

J

M

Be careful not to reverse the polarity when you connect the power cable.

You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.

The instructions above are also applied to SND-5080/SND-5080F/SNV-5080.

38_ installation & connection

Image 38
Contents Network Camera SNB-5000/SND-5080/SND-5080F/SNV-5080 Important Safety Instructions OverviewExplanation of Graphical Symbols Risk of Electric Shock Do not OpenDisconnection Device Do not place this apparatus near Do not block any ventilation openingsOverview Contents Login How to use the Menu Key Camera Menu SetupConnecting to the Camera Installing Silverlight RuntimeVideo Memory 128MB or higher Product FeaturesRecomended PC Specifications WHAT’S Included Model NameCamera SNB-5000 Model NameLens Options not included CS Lens Front Side ConnectorAT a Glance SNB-5000 DescriptionSystem PowerRear Side Alarm GNDAT a Glance SND-5080 AppearanceTerminals Alarm In / OutInside SD Memory Card Compartment for the SD memory cardComponents AT a Glance SND-5080F Inside Components AT a Glance SNV-5080 Alarm OUT Components Installing the camera Installation SND-5080Precautions before installation Installation & Connection Ceiling Mount Installation SND-5080FRemoving the dome cover To add an alarm cable Installation SNV-5080 DisassemblingOptional Accessories for Installation Pole Mount ADAPTORSCX-300PMInstalling on the ceiling directly Panning Tilting Lens rotation Mounting the CS lens Disconnect the power before proceedingMounting the Lens Mounting the C lensINSERTING/REMOVING AN SD Memory Card Connecting the Auto Iris Lens connectorFocusing Inserting an SD Memory CardRemoving an SD Memory Card English Selecting a memory card that’s suitable for you What is a memory card?Memory Card Information not Included Memory Card UseConnecting with Other Device Power Network Monitor OutEthernet Connection Connecting to the monitorPower Supply Connecting to Audio Input/Output Alarm I/O Wiring Diagram 5mA sinkConnecting to the I/O port box 3 4Local Network Connecting the Camera Directly to Local Area NetworkingConnecting to the camera from a local PC in the LAN  For setting the network type, refer to Interface. Connecting the Camera Directly to a Pppoe Modem IP Router IP Address Setup Buttons used in IP InstallerURL Static IP SetupManual Network Setup Network connection and setup Category Camera #1 Camera #2 Auto Network SetupIf the IP router has more than one camera connected Http Port 10000 VNP Port 4520 4530Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC VIA the InternetSsdr Samsung Super Dynamic Range Setup HOW to USE the Menu KEYCamera Menu Setup Enter Ö / Ö / Ö Enter Move to Ssdr and select onWhite Balance Setup Custom Backlight Setup Set the BLC LevelHLC Highlight Compensation Setup ToneExposure Setup BrightnessSelect CAM Title Screen Display SetupSENS-UP Automatically senses OSD Color Select POS and specify where to display the camera titleWhen done, select END To cancel your input, select CLR Day/Night Mode Setup Duration Adjust the brightnessImage Adjustment Login dialog should appear Connecting to the CameraUsing URL Normally, you wouldLogin To check the Ddns addressInstalling Silverlight Runtime English Using the Live Screen To toggle the audio sound Using OSD Screen MenuTo capture the snapshot To toggle the microphone soundPlayback Click Save Screenshot will be saved in the specified pathTo download SlimPlayer To check the information of the searched videoTo back up the searched video Click the About buttonVideo Profile SetupAudio & Video Setup What is GOP size? To add a video profileVideo Setup Interface Network SetupAudio Setup Port DdnsIP Filtering SSLRegistering with Ddns Event Setup FTP/EmailSD Record Alarm Input Video analysis English Specify the Transfer interval Click OK When done, click ApplyTime Schedule Date & Time System SetupProduct Information Change the current password for the administrator Upgrade/RebootFrom the Setup menu, select System tab Click User UserTo restore the backup settings, click Restore Select a backup file and click Open LogCamera Specification SsnriiiWeight Net PowerDimensions Net Items SNB-5000Network Specification TCP/IP, HTTP, HTTPS, SSL, Dhcp DdnsTroubleshooting Problem SolutionAlarm Video Transmission must be enabled Verify the settings in the following sequenceCheck Data & Time settings Video analysis settingGPL Software Linux kernel, busybox GPL/LGPL Software LicensePreamble We protect your rights with two stepsOriginal authors reputations Page Page How to Apply These Terms to Your New Programs Fitness for a Particular PurposeSee the GNU General Public License for more details Additional Definitionsƒ d Do one of the following Exception to of the GNU GPLConveying Modified Versions License ever published by the Free Software Foundation Combined LibrariesRevised Versions of the GNU Lesser General Public License Sales Network