4.Specify the activation conditions.
y FTP Sending : Specify the use of the FTP transfer if an event occurs.
y Record : Specify the use of recording if an event occurs.
5.When done, click [Apply].
SYSTEM SETUP
Product Information
1.From the Setup menu, select the
<System ( 
)> tab.
2.Click <Product information>.
3.Check the camera information, or provide details according to your network environment.
y Location : Specify the location where the camera is installed.
y Description : Provide detailed information about the camera location.
y Memo : Provide an explanation about the camera for better understanding.
y Language : Select a preferred language for the camera menus and the Web Viewer OSD.
4.When done, click [Apply].
Date & Time
1.From the Setup menu, select the
<System ( 
)> tab.
2.Click <Date & Time>.
3.Specify the time and date that will be applied to the camera.
y Current system time : Displays the current time settings of your system.
y Timezone : Specify the local time zone based on the GMT.
y Use Daylight Saving Time :
If checked, the time will be set one hour before the local time zone for the specified time period.
This option will be displayed only in areas where DST is applied.
M SETUP SCREEN