Sharp SND-5080 user manual Day/Night Mode Setup, Duration Adjust the brightness

Page 60

camera setup

Day/Night Mode Setup

You can switch the mode to adjust the black and white level as well as the colors.

▲/▼ Ö ◄/► Ö ENTER Ö ▲/▼ Ö ◄/► Ö ENTER

1.Select <SPECIAL>.

2.Select <DAY/NIGHT>, and specify a desired mode setting value.

y AUTO : Displays in color mode during normal daytime and switches to black and white mode in a low contrast scene at night.

Press the [Enter ( )] button to adjust the switching interval between the two modes.

MAIN SETUP
SSDR	ON
WHITE BAL	ATW
BACKLIGHT	OFF
EXPOSURE
SPECIAL
EXIT

SPECIAL SETUP
CAM TITLE	OFF
OSD COLOR	WHITE
DAY/NIGHT	AUTO
IMAGE ADJ
RETURN

If you set the AGC mode to OFF from

<EXPOSURE>, the AUTO DAY/NIGHT mode will be disabled accordingly.

-DWELL TIME : This is the time while

each applicable lighting condition is	DAY/NIGHT AUTO SETUP
kept in order to enable the switch
between day and night modes.	DWELL TIME	5 SEC
between day and night modes.	DURATION	SLOW
- DURATION : Adjust the brightness of	RETURN
the lighting where the mode switch
occurs.

yCOLOR : Always displays the video in colors.

yBW : Always displays the video in black and white.

3.When completed, select <RETURN> to return to the previous screen.

60_ camera setup

Image 60

Contents Network Camera SNB-5000/SND-5080/SND-5080F/SNV-5080 Important Safety Instructions OverviewExplanation of Graphical Symbols Risk of Electric Shock Do not OpenDisconnection Device Do not place this apparatus near Do not block any ventilation openingsOverview Contents How to use the Menu Key Camera Menu Setup Connecting to the CameraLogin Installing Silverlight RuntimeProduct Features Recomended PC SpecificationsVideo Memory 128MB or higher WHAT’S Included Model NameModel Name Lens Options not included CS LensCamera SNB-5000 Connector AT a Glance SNB-5000Front Side DescriptionPower Rear SideSystem Alarm GNDAT a Glance SND-5080 AppearanceAlarm In / Out InsideTerminals SD Memory Card Compartment for the SD memory cardComponents AT a Glance SND-5080F Inside Components AT a Glance SNV-5080 Alarm OUT Components Installation SND-5080 Precautions before installationInstalling the camera Installation & Connection Installation SND-5080F Removing the dome coverCeiling Mount To add an alarm cable Installation SNV-5080 DisassemblingOptional Accessories for Installation Pole Mount ADAPTORSCX-300PMInstalling on the ceiling directly Panning Tilting Lens rotation Disconnect the power before proceeding Mounting the LensMounting the CS lens Mounting the C lensConnecting the Auto Iris Lens connector FocusingINSERTING/REMOVING AN SD Memory Card Inserting an SD Memory CardRemoving an SD Memory Card English What is a memory card? Memory Card Information not IncludedSelecting a memory card that’s suitable for you Memory Card UseConnecting with Other Device Power Network Monitor OutConnecting to the monitor Power SupplyEthernet Connection Connecting to Audio Input/Output Alarm I/O Wiring Diagram 5mA sinkConnecting to the I/O port box 3 4Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANLocal Network  For setting the network type, refer to Interface. Connecting the Camera Directly to a Pppoe Modem IP Router IP Address Setup Buttons used in IP InstallerStatic IP Setup Manual Network SetupURL Network connection and setup Auto Network Setup If the IP router has more than one camera connectedCategory Camera #1 Camera #2 Http Port 10000 VNP Port 4520 4530Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the Camera from a Shared Local PC Connecting to the Camera from a Remote PC VIA the InternetHOW to USE the Menu KEY Camera Menu SetupSsdr Samsung Super Dynamic Range Setup Enter Ö / Ö / Ö Enter Move to Ssdr and select onWhite Balance Setup Custom Backlight Setup Set the BLC LevelHLC Highlight Compensation Setup ToneExposure Setup BrightnessScreen Display Setup SENS-UP Automatically sensesSelect CAM Title Select POS and specify where to display the camera title When done, select END To cancel your input, select CLROSD Color Day/Night Mode Setup Duration Adjust the brightnessImage Adjustment Connecting to the Camera Using URLLogin dialog should appear Normally, you wouldLogin To check the Ddns addressInstalling Silverlight Runtime English Using the Live Screen Using OSD Screen Menu To capture the snapshotTo toggle the audio sound To toggle the microphone soundPlayback Click Save Screenshot will be saved in the speciﬁed pathTo check the information of the searched video To back up the searched videoTo download SlimPlayer Click the About buttonSetup Audio & Video SetupVideo Profile What is GOP size? To add a video profileVideo Setup Network Setup Audio SetupInterface Port DdnsIP Filtering SSLRegistering with Ddns Event Setup FTP/EmailSD Record Alarm Input Video analysis English Click OK When done, click Apply Time ScheduleSpecify the Transfer interval System Setup Product InformationDate & Time Upgrade/Reboot From the Setup menu, select System tab Click UserChange the current password for the administrator UserTo restore the backup settings, click Restore Select a backup ﬁle and click Open LogCamera Specification SsnriiiPower Dimensions NetWeight Net Items SNB-5000Network Specification TCP/IP, HTTP, HTTPS, SSL, Dhcp DdnsTroubleshooting Problem SolutionVerify the settings in the following sequence Check Data & Time settingsAlarm Video Transmission must be enabled Video analysis settingGPL/LGPL Software License PreambleGPL Software Linux kernel, busybox We protect your rights with two stepsOriginal authors reputations Page Page How to Apply These Terms to Your New Programs Fitness for a Particular PurposeSee the GNU General Public License for more details Additional DeﬁnitionsException to of the GNU GPL Conveying Modiﬁed Versionsƒ d Do one of the following Combined Libraries Revised Versions of the GNU Lesser General Public LicenseLicense ever published by the Free Software Foundation Sales Network