Sharp SND-5080 user manual To restore the backup settings, click Restore

Page 85

yFactory default : Resets the system to the factory default.

-Except network parameter : Reset the other settings except for the interface/ port/DDNS/IP ﬁltering settings.

-All : Resets all settings including the camera settings. (however, the log information will not be reset)

If you reset all settings, the IP address will be defaulted to 192.168.1.100.

yConﬁguration backup & Restore : Backs up the current system settings before performing the restoration process.

yRestart : Restarts the system.

4.When done, click [Apply].

To perform the upgrade

1.Click [Upgrade].

2.Click [Browse] and specify a ﬁle to upgrade.

3.Click [Send].

4.The "UPGRADE" dialog appears where the progression will be shown in the bottom.

M If you forcibly terminate the upgrade process, upgrade will not be completed properly.

To save the current settings and restore the backup settings

1.Click [Backup].

The Save As dialog should appear.

2.Specify the backup path with a proper ﬁle name, and click [Save].

The backup ﬁle will be saved to the speciﬁed path in the format of ".bin".

3.To restore the backup settings, click [Restore].

M SETUP SCREEN

English _85

Image 85

Contents Network Camera SNB-5000/SND-5080/SND-5080F/SNV-5080 Overview Important Safety InstructionsRisk of Electric Shock Do not Open Explanation of Graphical SymbolsDisconnection Device Do not block any ventilation openings Do not place this apparatus nearOverview Contents Connecting to the Camera How to use the Menu Key Camera Menu SetupLogin Installing Silverlight RuntimeRecomended PC Specifications Product FeaturesVideo Memory 128MB or higher Model Name WHAT’S IncludedLens Options not included CS Lens Model NameCamera SNB-5000 AT a Glance SNB-5000 ConnectorFront Side DescriptionRear Side PowerSystem GND AlarmAppearance AT a Glance SND-5080Inside Alarm In / OutTerminals SD Memory Card Compartment for the SD memory cardComponents AT a Glance SND-5080F Inside Components AT a Glance SNV-5080 Alarm OUT Components Precautions before installation Installation SND-5080Installing the camera Installation & Connection Removing the dome cover Installation SND-5080FCeiling Mount To add an alarm cable Disassembling Installation SNV-5080Pole Mount ADAPTORSCX-300PM Optional Accessories for InstallationInstalling on the ceiling directly Panning Tilting Lens rotation Mounting the Lens Disconnect the power before proceedingMounting the CS lens Mounting the C lensFocusing Connecting the Auto Iris Lens connectorINSERTING/REMOVING AN SD Memory Card Inserting an SD Memory CardRemoving an SD Memory Card English Memory Card Information not Included What is a memory card?Selecting a memory card that’s suitable for you Memory Card UsePower Network Monitor Out Connecting with Other DevicePower Supply Connecting to the monitorEthernet Connection Connecting to Audio Input/Output 5mA sink Alarm I/O Wiring Diagram3 4 Connecting to the I/O port boxConnecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingLocal Network  For setting the network type, refer to Interface. Connecting the Camera Directly to a Pppoe Modem IP Router Buttons used in IP Installer IP Address SetupManual Network Setup Static IP SetupURL Network connection and setup If the IP router has more than one camera connected Auto Network SetupCategory Camera #1 Camera #2 Http Port 10000 VNP Port 4520 4530Dynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupConnecting to the Camera from a Remote PC VIA the Internet Connecting to the Camera from a Shared Local PCCamera Menu Setup HOW to USE the Menu KEYSsdr Samsung Super Dynamic Range Setup Enter Ö / Ö / Ö Enter Move to Ssdr and select onWhite Balance Setup Set the BLC Level Custom Backlight SetupTone HLC Highlight Compensation SetupBrightness Exposure SetupSENS-UP Automatically senses Screen Display SetupSelect CAM Title When done, select END To cancel your input, select CLR Select POS and specify where to display the camera titleOSD Color Duration Adjust the brightness Day/Night Mode SetupImage Adjustment Using URL Connecting to the CameraLogin dialog should appear Normally, you wouldTo check the Ddns address LoginInstalling Silverlight Runtime English Using the Live Screen To capture the snapshot Using OSD Screen MenuTo toggle the audio sound To toggle the microphone soundClick Save Screenshot will be saved in the speciﬁed path PlaybackTo back up the searched video To check the information of the searched videoTo download SlimPlayer Click the About buttonAudio & Video Setup SetupVideo Profile To add a video profile What is GOP size?Video Setup Audio Setup Network SetupInterface Ddns PortSSL IP FilteringRegistering with Ddns FTP/Email Event SetupSD Record Alarm Input Video analysis English Time Schedule Click OK When done, click ApplySpecify the Transfer interval Product Information System SetupDate & Time From the Setup menu, select System tab Click User Upgrade/RebootChange the current password for the administrator UserTo restore the backup settings, click Restore Log Select a backup ﬁle and click OpenSsnriii Camera SpecificationDimensions Net PowerWeight Net Items SNB-5000Network Specification Ddns TCP/IP, HTTP, HTTPS, SSL, DhcpProblem Solution TroubleshootingCheck Data & Time settings Verify the settings in the following sequenceAlarm Video Transmission must be enabled Video analysis settingPreamble GPL/LGPL Software LicenseGPL Software Linux kernel, busybox We protect your rights with two stepsOriginal authors reputations Page Page Fitness for a Particular Purpose How to Apply These Terms to Your New ProgramsAdditional Deﬁnitions See the GNU General Public License for more detailsConveying Modiﬁed Versions Exception to of the GNU GPLƒ d Do one of the following Revised Versions of the GNU Lesser General Public License Combined LibrariesLicense ever published by the Free Software Foundation Sales Network