setup screen
To use the IV analysis function according to the whole area based rule
1.Set <IV analysis function> to <Enable>.
2.Set the event rule to <Entire area based rules>.
3.Select a desired <Entire Area Rules>. y Appearing : An event where an object
that has not existed suddenly appears will be detected.
y Disappearing : An event where an object that has existed suddenly disappears will be detected.
y Scene Change : An event where the screen is changed at more than a certain time interval will be detected.
You can set the <Scene Change> rule along with rules : <Appearing> and <Disappearing>.
4.Click [OK].
5.When done, click [Apply].
Time Schedule
You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event.
1.From the Setup menu, select the
<Event ( 
)> tab.
2.Click <Time Schedule>.
To set the timer event
1.Set <Timer Event Setup> to Enable.
2.Specify the <Activation time>.
y Always : Always sends an image at the set interval.
y Only scheduled time : Periodically transfers image only at a specified time and date.
3.Specify the <Transfer interval>.
82_ setup screen