Uniden USC230 owner manual + 1-9, 0/Race Selects

Page 29

SC230 Paper OM 062206.fm Page 29 Friday, July 21, 2006 7:39 PM

Key Name			Description

L/O			L/O – Lets you lock out a selected
			channel or skip a specified
			frequency.
							+ L/O – Press quickly to lock
				Func			+ L/O – Press quickly to lock
			and unlock a selected system in
			Scan or Scan Hold mode and
			review search lockout frequencies
			in Search or Search Hold mode.
			Press and hold for more than 2
			seconds to unlock all groups and
			channels in a conventional system.

		/				– Press and hold for more than


			2 seconds to turn the scanner on
			or off. Press quickly to cancel a
			prompt.
							+	– Turns the display
				Func			+	– Turns the display
			backlight on or off.

1-9, 0/Race			1-9– Enters a frequency, enters
			quick key numbers, selects a
			custom search range in Custom
			Search mode, and selects systems
			by quick key in scan mode.
			0/Race – Selects the race quick
			key, enters a frequency, and
			selects a custom search range in
			Custom Search mode.
							+ 1-9, 0/Race – Selects
				Func			+ 1-9, 0/Race – Selects
			groups by quick key in scan mode.

1/Pri			1 – Enters a 1.
							+ Pri – Selects the priority
				Func			+ Pri – Selects the priority
			mode in scan hold mode.

Setting Up Your Scanner

29

Image 29

Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This ManualEntering Text What is Searching? What is Scanning?Understanding Scanning Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the RacetrackRepeater Operation Where To Get More InformationSimplex Operation Information On The Internet Included With Your Scanner Included With Your ScannerUsing Internal Batteries Setting Up Your ScannerUsing Rechargeable Batteries Setting Up Your ScannerUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting an Optional Antenna Using AC PowerConnecting the Antenna Attaching the Belt Clip Connecting an Earphone/HeadphoneConnecting an Extension Speaker Attaching the Wrist Strap Installing the Demo SoftwareKey Name Description Look At The Keypad+ 1-9, 0/Race Selects Rcl Look At The Display Using the Scroll Control Using MenuUsing Func Basic Operation Turning On the Scanner Setting the SquelchScanning Systems Basic OperationBefore You Get To The Track When You Get To The TrackScanning Preprogrammed Races Selecting Interference Eliminator Codes Selecting Systems to ScanLocking/Unlocking Systems Selecting System Channel GroupsHolding On a Channel Locking/Unlocking ChannelsTemporarily Holding On a System Quickly Recalling Channels Quick-Storing ChannelsOther Settings Initializing the Scanner’s Memory Using the BacklightConnecting Your Scanner to a Personal Computer Using the PC Control Cloning OptionsCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing SystemsEditing a Driver Entering/Editing a Car NumberDeleting a Car Setting a Car’s Quick KeyEditing a Car’s Channel Programming Conventional Systems Setting Lockout On a CarEntering/Editing Conventional Channels Entering/Editing Conventional Channel GroupsProgramming Radio Systems Programming/Editing Optional Settings System-Level SettingsEditing the System Name Editing the System Quick Key Conventional Systems OnlySetting the System Hold Time Setting Group LockoutSetting Data Skip Setting the Channel Delay TimeDeleting Systems Group-Level SettingsCopying Systems Entering/Editing the Group NameEdit Group Select the group Set Quick Key Setting the Group Quick KeyEditing the Channel Name Conventional Systems Only Channel-Level SettingsDeleting Groups Setting Channel Priority Setting CTCSS/DCS Setting Channel AlertSetting Channel Modulation Setting the Frequency Step Setting Channel AttenuationDeleting Channels Setting Channel LockoutCopying/Pasting Channels Searching and Storing Service SearchChanging the step of Air Band Quick SearchCustom Search CTCSS/DCS SearchCustom Frequency MHz Preset Custom Search RangeCustom Editing a Custom Search Range Auto Search and StoreStoring a System Selecting a SystemUsing the Close Call Feature Using the Close Call FeatureTurn the scroll control to select an option Setting Close Call OptionsUsing the Close Call Feature Close Call Hits Managing Locked-Out Frequencies Search and Close Call OptionsSearching for Subaudible Tones Unlocking All FrequenciesSetting the Modulation Type Setting the Maximum Auto Store ValueSetting the Delay Time Setting AttenuationSetting Data Skip Setting the Search Frequency Step Cleaning Care and MaintenanceGeneral Use LocationTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesPlanning PlanningCollecting Information Planning Car #/Driver-Frequency-Priority-CTCSS/DCS Filling Out The Racing System WorksheetRace Name Racing System Worksheet System Name and Quick Key Filling Out The Conventional System WorksheetGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System W orksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0