Uniden USC230 owner manual Setting Channel Alert, Setting CTCSS/DCS

Page 61

SC230 Paper OM 062206.fm Page 61 Friday, July 21, 2006 7:39 PM

Setting Channel Alert

Menu

program system

E

Select the system

E

Edit Group

E

 

Select the group

 

E

Edit Channel

 

E

Select the channel

E

Set Alert

E

 

This setting controls whether the scanner will alert you when the channel becomes active. Select your setting, then press E.

On - the scanner beeps when the channel becomes active. Off - no alert sounds.

Note: The default setting is Off.

Setting CTCSS/DCS

Menu

program system

E

Select the system

 

E

Edit Group

E

 

Select the group

 

E

Edit Channel

 

E

Select the channel

E

Set CTCSS/DCS

 

E

This setting controls how a subaudible CTCSS or DCS is used for the channel. Select your setting, then press E.

Off - any signal opens squelch.

Search - the scanner searches for and displays any CTCSS or DCS tone that accompanies the transmission.

CTCSS - the scanner only opens squelch if the CTCSS tone you select is also present with the signal. The scanner then prompts you to scroll to the desired tone.

Programming/Editing Optional Settings

61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This ManualEntering Text What is Searching? What is Scanning?Understanding Scanning Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the RacetrackSimplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your ScannerUsing Internal Batteries Setting Up Your ScannerUsing Rechargeable Batteries Setting Up Your ScannerUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Attaching the Wrist Strap Installing the Demo SoftwareKey Name Description Look At The Keypad+ 1-9, 0/Race Selects Rcl Look At The Display Using Func Using MenuUsing the Scroll Control Basic Operation Turning On the Scanner Setting the SquelchScanning Systems Basic OperationScanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Interference Eliminator Codes Selecting Systems to ScanLocking/Unlocking Systems Selecting System Channel GroupsTemporarily Holding On a System Locking/Unlocking ChannelsHolding On a Channel Quickly Recalling Channels Quick-Storing ChannelsOther Settings Initializing the Scanner’s Memory Using the BacklightConnecting Your Scanner to a Personal Computer Using the PC Control Cloning OptionsCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Quickly Programming Racing Systems Programming Radio SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing SystemsEditing a Driver Entering/Editing a Car NumberEditing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Programming Conventional Systems Setting Lockout On a CarEntering/Editing Conventional Channels Entering/Editing Conventional Channel GroupsProgramming Radio Systems Programming/Editing Optional Settings System-Level SettingsEditing the System Name Editing the System Quick Key Conventional Systems OnlySetting the System Hold Time Setting Group LockoutSetting Data Skip Setting the Channel Delay TimeDeleting Systems Group-Level SettingsCopying Systems Entering/Editing the Group NameEdit Group Select the group Set Quick Key Setting the Group Quick KeyDeleting Groups Channel-Level SettingsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting CTCSS/DCS Setting Channel AlertSetting Channel Modulation Setting the Frequency Step Setting Channel AttenuationDeleting Channels Setting Channel LockoutCopying/Pasting Channels Searching and Storing Service SearchChanging the step of Air Band Quick SearchCustom Search CTCSS/DCS SearchCustom Frequency MHz Preset Custom Search RangeCustom Editing a Custom Search Range Auto Search and StoreStoring a System Selecting a SystemUsing the Close Call Feature Using the Close Call FeatureTurn the scroll control to select an option Setting Close Call OptionsUsing the Close Call Feature Close Call Hits Managing Locked-Out Frequencies Search and Close Call OptionsSearching for Subaudible Tones Unlocking All FrequenciesSetting the Modulation Type Setting the Maximum Auto Store ValueSetting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Cleaning Care and MaintenanceGeneral Use LocationTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesCollecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet System Name and Quick Key Filling Out The Conventional System WorksheetGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System W orksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0
Top Page Image Contents