Uniden USC230 owner manual Manually Programming Racing Systems, Editing the Car

Page 48

SC230 Paper OM 062206.fm Page 48 Friday, July 21, 2006 7:39 PM

Manually Programming Racing Systems


		Program SysteM		E
	Menu	Program SysteM		E
	New System		E	Racing	E
Confirm? E
The scanner creates an empty racing system, with a
default name of System nnn				R. nnn increments as

you add new systems. R indicates that this is a racing system.

Refer to the appropriate section to set system-wide options:

•See “Editing the System Name” on Page 54

•See “Setting Group Lockout” on Page 55

•See “Setting the System Hold Time” on Page 55

•See “Setting the Channel Delay Time” on Page 56

•See “Setting Data Skip” on Page 56

•See “Editing the Car” on Page 48

•See “Deleting Systems” on Page 57

•See “Copying Systems” on Page 57

Editing the Car

		Program SysteM			E
	Menu	Program SysteM			E
Select the system				E
Edit		Car	E
Select the car				E

Follow these steps to enter the car options.

Rotate the scroll control to select one of the following options. Then refer to the appropriate section to set or change a car setting.

•See “Entering/Editing a Car Number” on Page 49.

•See “Editing a Driver” on Page 49.

•See “Setting a Car’s Quick Key” on Page 50.

•See “Editing a Car’s Channel” on Page 50.

•See “Deleting a Car” on Page 50.

•See “Setting Lockout On A Car” on Page 51.

Programming Radio Systems

48

Image 48

Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store About This Manual How the Scanner’s Controls Are Represented in This ManualEntering Text What is Scanning? What is Searching?Understanding Scanning Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz Using the Scanner at the Racetrack Conventional ScanningWhere To Get More Information Simplex OperationRepeater Operation Information On The Internet Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Using Internal BatteriesUsing Rechargeable Batteries Setting Up Your ScannerUsing Non-rechargeable Batteries Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension SpeakerAttaching the Belt Clip Installing the Demo Software Attaching the Wrist StrapLook At The Keypad Key Name Description+ 1-9, 0/Race Selects Rcl Look At The Display Using Menu Using FuncUsing the Scroll Control Turning On the Scanner Setting the Squelch Basic OperationScanning Systems Basic OperationWhen You Get To The Track Scanning Preprogrammed RacesBefore You Get To The Track Selecting Systems to Scan Selecting Interference Eliminator CodesSelecting System Channel Groups Locking/Unlocking SystemsLocking/Unlocking Channels Temporarily Holding On a SystemHolding On a Channel Quick-Storing Channels Quickly Recalling ChannelsOther Settings Using the Backlight Initializing the Scanner’s MemoryUsing the PC Control Cloning Options Connecting Your Scanner to a Personal ComputerCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Programming Radio Systems Quickly Programming Racing SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Manually Programming Racing Systems Editing the CarEntering/Editing a Car Number Editing a DriverSetting a Car’s Quick Key Editing a Car’s ChannelDeleting a Car Setting Lockout On a Car Programming Conventional SystemsEntering/Editing Conventional Channel Groups Entering/Editing Conventional ChannelsProgramming Radio Systems System-Level Settings Programming/Editing Optional SettingsEditing the System Name Editing the System Quick Key Conventional Systems OnlySetting Group Lockout Setting the System Hold TimeSetting the Channel Delay Time Setting Data SkipGroup-Level Settings Deleting SystemsCopying Systems Entering/Editing the Group NameSetting the Group Quick Key Edit Group Select the group Set Quick KeyChannel-Level Settings Deleting GroupsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting Channel Alert Setting CTCSS/DCSSetting Channel Modulation Setting Channel Attenuation Setting the Frequency StepSetting Channel Lockout Deleting ChannelsCopying/Pasting Channels Service Search Searching and StoringChanging the step of Air Band Quick SearchCTCSS/DCS Search Custom SearchPreset Custom Search Range Custom Frequency MHzCustom Auto Search and Store Editing a Custom Search RangeSelecting a System Storing a SystemUsing the Close Call Feature Using the Close Call FeatureSetting Close Call Options Turn the scroll control to select an optionUsing the Close Call Feature Close Call Hits Search and Close Call Options Managing Locked-Out FrequenciesSearching for Subaudible Tones Unlocking All FrequenciesSetting the Maximum Auto Store Value Setting the Modulation TypeSetting Attenuation Setting Data SkipSetting the Delay Time Setting the Search Frequency Step Care and Maintenance CleaningGeneral Use LocationTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesPlanning Collecting InformationPlanning Planning Filling Out The Racing System Worksheet Race NameCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Filling Out The Conventional System Worksheet System Name and Quick KeyGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System Worksheet Conventional System W orksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0