Uniden USC230 owner manual Look At The Display

Page 31

SC230 Paper OM 062206.fm Page 31 Friday, July 21, 2006 7:39 PM

A Look At The Display

The display has indicators that show the scanner's current operating status. The display information helps you understand how your scanner operates. The dark area shown above the icons in this illustration is the text display area. Information about the currently tuned frequency appears here.

SYS - shows the currently activated system, appears with numbers (1-9). The currently active system indicator flashes.

ATT - appears when the attenuator feature is turned on.

PRI - appears when the priority feature is turned on (see “Priority Scan” on Page 39).

- appears when you lock the keypad (see “Locking/Unlocking the Keypad” on Page 39).

- alerts you when the battery power gets low.

GRP - shows the currently activated group, appears with numbers ( - ). The currently active group indicator flashes.

AM/FM/NFM - appears to show the type of transmission.

L/O - appears when you manually select a channel you locked out or a skip frequency.

- appears when you hold down function.

Func

to select a

- appears when the scanner is set to a Close Call feature mode (see “Using the Close Call Feature” on Page 72).

Setting Up Your Scanner

31

Image 31

Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This ManualEntering Text Understanding the Scanner’s Memory What is Scanning?What is Searching? Understanding ScanningWhat is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the RacetrackSimplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Rechargeable BatteriesUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Attaching the Wrist Strap Installing the Demo SoftwareKey Name Description Look At The Keypad+ 1-9, 0/Race Selects Rcl Look At The Display Using Func Using MenuUsing the Scroll Control Basic Operation Turning On the Scanner Setting the SquelchBasic Operation Scanning SystemsScanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Interference Eliminator Codes Selecting Systems to ScanLocking/Unlocking Systems Selecting System Channel GroupsTemporarily Holding On a System Locking/Unlocking ChannelsHolding On a Channel Quickly Recalling Channels Quick-Storing ChannelsOther Settings Initializing the Scanner’s Memory Using the BacklightConnecting Your Scanner to a Personal Computer Using the PC Control Cloning OptionsCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Quickly Programming Racing Systems Programming Radio SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing SystemsEditing a Driver Entering/Editing a Car NumberEditing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Programming Conventional Systems Setting Lockout On a CarEntering/Editing Conventional Channels Entering/Editing Conventional Channel GroupsProgramming Radio Systems Editing the System Quick Key Conventional Systems Only System-Level SettingsProgramming/Editing Optional Settings Editing the System NameSetting the System Hold Time Setting Group LockoutSetting Data Skip Setting the Channel Delay TimeEntering/Editing the Group Name Group-Level SettingsDeleting Systems Copying SystemsEdit Group Select the group Set Quick Key Setting the Group Quick KeyDeleting Groups Channel-Level SettingsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting CTCSS/DCS Setting Channel AlertSetting Channel Modulation Setting the Frequency Step Setting Channel AttenuationDeleting Channels Setting Channel LockoutCopying/Pasting Channels Quick Search Service SearchSearching and Storing Changing the step of Air BandCustom Search CTCSS/DCS SearchCustom Frequency MHz Preset Custom Search RangeCustom Editing a Custom Search Range Auto Search and StoreStoring a System Selecting a SystemUsing the Close Call Feature Using the Close Call FeatureTurn the scroll control to select an option Setting Close Call OptionsUsing the Close Call Feature Close Call Hits Unlocking All Frequencies Search and Close Call OptionsManaging Locked-Out Frequencies Searching for Subaudible TonesSetting the Modulation Type Setting the Maximum Auto Store ValueSetting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Location Care and MaintenanceCleaning General UseTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesCollecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Frequency-Alpha Tag-Priority-CTCSS/DCS Filling Out The Conventional System WorksheetSystem Name and Quick Key Group Name and Quick KeyConventional System W orksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0