Uniden USC230 owner manual Quick-Storing Channels, Quickly Recalling Channels

Page 38

SC230 Paper OM 062206.fm Page 38 Friday, July 21, 2006 7:39 PM

Quick-Storing Channels

1.Hold on an existing channel in any system.

2.Enter the frequency you want to store.

3.To quick-store the channel, press E. Otherwise, press No.

If you enter a frequency then press E, the scanner stores it in the Qck Save Grp group in a system called Qck Save Cnv Sys. These are created if they do not exist. Then, the scanner prompts you to save other channel settings.

If you pressed No in Step 3, the scanner prompts you to select the system and the group where you want to store the frequency.

Quickly Recalling Channels

1.Press Hold to hold on any channel.

2.Press Func + Rcl. The scanner prompts you to select the system where the channel is stored.

3.Rotate the scroll control to select the system, then press E. The scanner prompts you to select the channel group where the channel is stored.

4.Rotate the scroll control to select the group, then press E.

If you selected a conventional system, the scanner prompts you to select a channel. Rotate the scroll control to select the channel, then press E to hold on that channel.

Otherwise, if you selected a racing system, the scanner automatically selects an active channel from the car group and holds on that group.

Basic Operation

38

Image 38

Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store About This Manual How the Scanner’s Controls Are Represented in This ManualEntering Text Understanding Scanning What is Scanning?What is Searching? Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz Using the Scanner at the Racetrack Conventional ScanningRepeater Operation Where To Get More InformationSimplex Operation Information On The Internet Included With Your Scanner Included With Your ScannerUsing Rechargeable Batteries Setting Up Your ScannerUsing Internal Batteries Setting Up Your ScannerUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting an Optional Antenna Using AC PowerConnecting the Antenna Attaching the Belt Clip Connecting an Earphone/HeadphoneConnecting an Extension Speaker Installing the Demo Software Attaching the Wrist StrapLook At The Keypad Key Name Description+ 1-9, 0/Race Selects Rcl Look At The Display Using the Scroll Control Using MenuUsing Func Scanning Systems Turning On the Scanner Setting the SquelchBasic Operation Basic OperationBefore You Get To The Track When You Get To The TrackScanning Preprogrammed Races Selecting Systems to Scan Selecting Interference Eliminator CodesSelecting System Channel Groups Locking/Unlocking SystemsHolding On a Channel Locking/Unlocking ChannelsTemporarily Holding On a System Quick-Storing Channels Quickly Recalling ChannelsOther Settings Using the Backlight Initializing the Scanner’s MemoryUsing the PC Control Cloning Options Connecting Your Scanner to a Personal ComputerCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Enter Driver Programming Radio Systems Manually Programming Racing Systems Editing the CarEntering/Editing a Car Number Editing a DriverDeleting a Car Setting a Car’s Quick KeyEditing a Car’s Channel Setting Lockout On a Car Programming Conventional SystemsEntering/Editing Conventional Channel Groups Entering/Editing Conventional ChannelsProgramming Radio Systems Editing the System Name System-Level SettingsProgramming/Editing Optional Settings Editing the System Quick Key Conventional Systems OnlySetting Group Lockout Setting the System Hold TimeSetting the Channel Delay Time Setting Data SkipCopying Systems Group-Level SettingsDeleting Systems Entering/Editing the Group NameSetting the Group Quick Key Edit Group Select the group Set Quick KeyEditing the Channel Name Conventional Systems Only Channel-Level SettingsDeleting Groups Setting Channel Priority Setting Channel Alert Setting CTCSS/DCSSetting Channel Modulation Setting Channel Attenuation Setting the Frequency StepSetting Channel Lockout Deleting ChannelsCopying/Pasting Channels Changing the step of Air Band Service SearchSearching and Storing Quick SearchCTCSS/DCS Search Custom SearchPreset Custom Search Range Custom Frequency MHzCustom Auto Search and Store Editing a Custom Search RangeSelecting a System Storing a SystemUsing the Close Call Feature Using the Close Call FeatureSetting Close Call Options Turn the scroll control to select an optionUsing the Close Call Feature Close Call Hits Searching for Subaudible Tones Search and Close Call OptionsManaging Locked-Out Frequencies Unlocking All FrequenciesSetting the Maximum Auto Store Value Setting the Modulation TypeSetting the Delay Time Setting AttenuationSetting Data Skip Setting the Search Frequency Step General Use Care and MaintenanceCleaning LocationTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesPlanning PlanningCollecting Information Planning Car #/Driver-Frequency-Priority-CTCSS/DCS Filling Out The Racing System WorksheetRace Name Racing System Worksheet Group Name and Quick Key Filling Out The Conventional System WorksheetSystem Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System Worksheet Conventional System W orksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0