Uniden USC230 owner manual Setting Channel Priority

Page 60

SC230 Paper OM 062206.fm Page 60 Friday, July 21, 2006 7:39 PM

2.Press and hold down Func then rotate the scroll control once to select the next letter.

3.Repeat Steps 1 and 2 until you have entered the channel name. Then press E or press down on the scroll control to accept the setting.

Hints:

•Each channel name can be up to 16 characters. Abbreviate as necessary to fit.

•The channel name appears on the second line of the display when the scanner stops on a channel.

•If you do not enter a channel name, the scanner displays the frequency when it stops on a channel.

•Press twice to delete the current character.

•Press three times to clear the entire alpha tag.

•Channel names take up extra memory. To maximize channels, use channel names only where necessary.

Setting Channel Priority

Menu

program system

E

Select the system

 

E

Edit Group

E

 

Select the group

 

E

Edit Channel

 

E

Select the channel

E

Set Priority

 

E

This setting controls whether the scanner treats the channel as a priority channel while scanning. Select your setting, then press E.

On - when you turn on the Priority feature, the channel will be scanned every 2 seconds. P appears at the end of the default name.

Off - the channel will not be treated with priority. Note: The default setting is Off.

Programming/Editing Optional Settings

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store About This Manual How the Scanner’s Controls Are Represented in This ManualEntering Text What is Scanning? What is Searching?Understanding Scanning Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz Using the Scanner at the Racetrack Conventional ScanningWhere To Get More Information Simplex OperationRepeater Operation Information On The Internet Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Using Internal BatteriesUsing Rechargeable Batteries Setting Up Your ScannerUsing Non-rechargeable Batteries Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension SpeakerAttaching the Belt Clip Installing the Demo Software Attaching the Wrist StrapLook At The Keypad Key Name Description+ 1-9, 0/Race Selects Rcl Look At The Display Using Menu Using FuncUsing the Scroll Control Turning On the Scanner Setting the Squelch Basic OperationScanning Systems Basic OperationWhen You Get To The Track Scanning Preprogrammed RacesBefore You Get To The Track Selecting Systems to Scan Selecting Interference Eliminator CodesSelecting System Channel Groups Locking/Unlocking SystemsLocking/Unlocking Channels Temporarily Holding On a SystemHolding On a Channel Quick-Storing Channels Quickly Recalling ChannelsOther Settings Using the Backlight Initializing the Scanner’s MemoryUsing the PC Control Cloning Options Connecting Your Scanner to a Personal ComputerCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Programming Radio Systems Quickly Programming Racing SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Manually Programming Racing Systems Editing the CarEntering/Editing a Car Number Editing a DriverSetting a Car’s Quick Key Editing a Car’s ChannelDeleting a Car Setting Lockout On a Car Programming Conventional SystemsEntering/Editing Conventional Channel Groups Entering/Editing Conventional ChannelsProgramming Radio Systems System-Level Settings Programming/Editing Optional SettingsEditing the System Name Editing the System Quick Key Conventional Systems OnlySetting Group Lockout Setting the System Hold TimeSetting the Channel Delay Time Setting Data SkipGroup-Level Settings Deleting SystemsCopying Systems Entering/Editing the Group NameSetting the Group Quick Key Edit Group Select the group Set Quick KeyChannel-Level Settings Deleting GroupsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting Channel Alert Setting CTCSS/DCSSetting Channel Modulation Setting Channel Attenuation Setting the Frequency StepSetting Channel Lockout Deleting ChannelsCopying/Pasting Channels Service Search Searching and StoringChanging the step of Air Band Quick SearchCTCSS/DCS Search Custom SearchPreset Custom Search Range Custom Frequency MHzCustom Auto Search and Store Editing a Custom Search RangeSelecting a System Storing a SystemUsing the Close Call Feature Using the Close Call FeatureSetting Close Call Options Turn the scroll control to select an optionUsing the Close Call Feature Close Call Hits Search and Close Call Options Managing Locked-Out FrequenciesSearching for Subaudible Tones Unlocking All FrequenciesSetting the Maximum Auto Store Value Setting the Modulation TypeSetting Attenuation Setting Data SkipSetting the Delay Time Setting the Search Frequency Step Care and Maintenance CleaningGeneral Use LocationTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesPlanning Collecting InformationPlanning Planning Filling Out The Racing System Worksheet Race NameCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Filling Out The Conventional System Worksheet System Name and Quick KeyGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System Worksheet Conventional System W orksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0
Top Page Image Contents