Uniden USC230 owner manual Preprogrammed Systems

Page 91

USC230.book Page 91 Thursday, August 3, 2006 10:47 AM

Preprogrammed Systems

Your scanner is preprogrammed with frequencies used at races within the Formula 1.

By default, one of the racing systems are unlocked, and your scanner begins to scan them when you turn it on. To speed up scanning, you can lock out systems that are beyond your reception area (typically no more than a few kilometers using the supplied stub antenna).

Follow these steps to lock out systems:.

1. Press and hold

Func

.

2.While continuing to hold Func , rotate the scroll control to select a system you want to lock out.

3.While continuing to hold the system.

Func

, press L/O to lock out

4.Repeat Steps 2, 3, and 4 to lock out additional systems.

The preprogrammed systems provide a starting point; you will want to find out more information about your local radio systems so you can customize the programming to better suit your listening preferences.

Notes:

•To free up memory, you can delete systems that you will not be monitoring. Refer to “Deleting Systems” on Page 57.

•Data used for the preprogrammed information was supplied courtesy of http://www.racescanner.eu, the Internet’s premier scanning resource.

Preprogrammed Systems

91

Image 91

Contents OWNER’S Manual Precautions PrecautionsSC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction IntroductionMode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature HighlightsFeature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This ManualEntering Text Understanding the Scanner’s Memory What is Scanning?What is Searching? Understanding ScanningWhat is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the RacetrackSimplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Rechargeable BatteriesUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Attaching the Wrist Strap Installing the Demo SoftwareKey Name Description Look At The Keypad+ 1-9, 0/Race Selects Rcl Look At The Display Using Func Using MenuUsing the Scroll Control Basic Operation Turning On the Scanner Setting the SquelchBasic Operation Scanning SystemsScanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Interference Eliminator Codes Selecting Systems to ScanLocking/Unlocking Systems Selecting System Channel GroupsTemporarily Holding On a System Locking/Unlocking ChannelsHolding On a Channel Quickly Recalling Channels Quick-Storing ChannelsOther Settings Initializing the Scanner’s Memory Using the BacklightConnecting Your Scanner to a Personal Computer Using the PC Control Cloning OptionsCloning the Scanner Using the Menu Using the MenuSet up Priority Scan Quickly Programming Racing Systems Programming Radio SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing SystemsEditing a Driver Entering/Editing a Car NumberEditing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Programming Conventional Systems Setting Lockout On a CarEntering/Editing Conventional Channels Entering/Editing Conventional Channel GroupsProgramming Radio Systems Editing the System Quick Key Conventional Systems Only System-Level SettingsProgramming/Editing Optional Settings Editing the System NameSetting the System Hold Time Setting Group LockoutSetting Data Skip Setting the Channel Delay TimeEntering/Editing the Group Name Group-Level SettingsDeleting Systems Copying SystemsEdit Group Select the group Set Quick Key Setting the Group Quick KeyDeleting Groups Channel-Level SettingsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting CTCSS/DCS Setting Channel AlertSetting Channel Modulation Setting the Frequency Step Setting Channel AttenuationDeleting Channels Setting Channel LockoutCopying/Pasting Channels Quick Search Service SearchSearching and Storing Changing the step of Air BandCustom Search CTCSS/DCS SearchCustom Frequency MHz Preset Custom Search RangeCustom Editing a Custom Search Range Auto Search and StoreStoring a System Selecting a SystemUsing the Close Call Feature Using the Close Call FeatureTurn the scroll control to select an option Setting Close Call OptionsUsing the Close Call Feature Close Call Hits Unlocking All Frequencies Search and Close Call OptionsManaging Locked-Out Frequencies Searching for Subaudible TonesSetting the Modulation Type Setting the Maximum Auto Store ValueSetting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Location Care and MaintenanceCleaning General UseTroubleshooting TroubleshootingTroubleshooting Specifications SpecificationsOptional Accessories Optional AccessoriesCollecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Frequency-Alpha Tag-Priority-CTCSS/DCS Filling Out The Conventional System WorksheetSystem Name and Quick Key Group Name and Quick KeyConventional System W orksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsDeclaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0