Inserting Film
Use only one type of film; do not place negatives in the holder with positive film.
Be sure the end of the film is flush with the stops. A gap between film and stop could interfere with accurate color reproduction.
2.3Close the holder
Close the holder, pressing the covers down until they latch.
Scanning Curled Film
Curl of 10 mm or less can be removed as follows:
1Unlatch the movable base
Slide the latch in the direction shown.
2Flatten the film
Place your fingers on the grips and slide them gently outwards. Do not use force. To prevent the film from sliding out of position, press the holder cover lightly before sliding the grips.
3Latch the movable base
Slide the latch in the direction shown.
Film with a curl of more than 10 mm can not be scanned in the
29