Updating the IEEE 1394 Drivers (Windows 98 SE Only)
Users of Windows 98 SE must update the IEEE 1394 drivers provided with Windows before they can use the scanner. This update is required regardless of whether an IEEE 1394 interface is already installed or the user is installing an IEEE 1394 interface for the first time.
1
2
3
4 Restart the computer
When the dialog shown at right is dis- played, remove the Nikon Scan CD from the
Installing the IEEE 1394 Interface Board
Once the computer has restarted, users of the supplied IEEE 1394 interface board can install the board ( 66) and interface device drivers (
The “Insert Disk” Dialog
If an “Insert Disk” dialog is displayed the first time the scanner is connected and turned on, the IEEE 1394 driver update has not been completed successfully. Do NOT insert the Windows 98 Second Edition CD. Make sure the
1 Click Browse…
The dialog shown at right will be dis- played. Click Browse….
2 Locate “ntmap.sys”
Select drive “c:” from the Drives menu. In the “Folders” list,
65