FH-869G Glass-Covered Holder for Medium-Format Film
The
• 6 × 4.5:
Inserting Film
1 Open the holder
Slide the latch in the direction shown and open the holder.
Latch
Newton’s Rings
If the film is folded or twisted, Newton’s rings (a radial interference pattern) may appear when the film is scanned. This can be prevented by placing a masking sheet in the holder as shown at right. The aperture at the front of the masking sheet should match the film frame size.
Place stickers between frames on the emulsion surface of the film (no sticker is required between the first two frames). The stickers can then be used to fasten the film to the masking sheet. Stickers can be reused.
Keep the Glass Clean
Emulsion | Stickers |
surface |
|
Place side with stickers
down
The inner surface of the glass cover been treated to prevent interference. Avoid leaving fingerprints or other stains on the glass.
54