FH-869M Holder for Medium-Format Slides
The
Do Not Mix Positive and Negative Film
Do not place mounted negatives in the holder with positive slides.
Inserting Slides
Insert the slides between the guides. The slides should be oriented to match the ap- ertures in the holder and the reflective film base should be up ( 26). Stop when the slide contacts the base of the clips.
Inserting Slides
Insert slides between the guides. Forcing the slides onto the guides could damage the slides or clips and prevent the scanner from focusing correctly. To minimize resistance, try inserting slides at a slight angle.
Direction of
insertion
Guides
Thumbnails displayed in order shown
Removing Slides
Slide the mounts out from under the clips that hold them in place.
Do Not Use Force
Do not use force when removing slides. Fail- ure to observe this precaution could damage the clips. Do not lift the slides up until fully removed from the clips.
Do Not Store Slides in the Holder
Leaving slides in the holder for extended periods could damage the clips holding the slides in place.
53