IBM 8088, 8086, 8090, 8089, 8087 manual Installing options, Features

Page 15

Chapter 1. Installing options

This chapter provides an introduction to the features and options that are available for your computer. You can expand the capabilities of your computer by adding memory or adapters. When installing an option, use these instructions along with the instructions that come with the option.

Important

Before you install or remove any option, read “Important safety information” on page v. These precautions and guidelines will help you work safely.

Features

This section provides an overview of the computer features and preinstalled software.

System information

The following information covers a variety of models. For information for your specific model, use the IBM Setup Utility. See Chapter 2, “Using the IBM Setup Utility program,” on page 25.

Microprocessor (varies by model type)

vIntel® Pentium® 4 processor with HyperThreading Technology

vIntel Pentium 4 processor

vIntel Celeron® processor

vInternal cache (size varies by model type)

Memory

vSupport for two double data rate (DDR) dual inline memory modules (DIMMs)

v512 KB flash memory for system programs

Internal drives

vInternal hard disk drive

vOptical drive (some models)

© Copyright IBM Corp. 2004

1

Image 15

Contents User Guide Types 8086, 8087 Types 8089 Page User Guide Types 8086, 8087 Types 8089 Page Contents Iv User Guide Conditions that require immediate action Important safety informationGeneral safety guidelines ServicePower cords and power adapters Extension cords and related devices Plugs and outletsBatteries Heat and product ventilation CD and DVD drive safetyTo connect To disconnect Additional safety informationLithium battery notice Modem safety informationLaser compliance statement Power supply statementInformation resources OverviewXii User Guide Features Installing optionsVideo subsystem Operating systems preinstalled varies by model type Specifications Available options Supported operating positionsHandling static-sensitive devices Locating the connectors on the front of your computer Installing external optionsLocating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Identifying parts on the system board Locating componentsInstalling memory Installing options What to do next Installing a PCI adapterWhat to do next Removing and replacing an optical drive Installing internal drivesRemoving and replacing a hard disk drive User Guide Connecting a parallel ATA hard disk drive Integrated cable lock Password protection Security featuresChanging the battery Erasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables User Guide Exiting from the IBM Setup Utility program Using the IBM Setup Utility programStarting the IBM Setup Utility program Viewing and changing settingsUsing Security Profile by Device User passwordAdministrator password Setting, changing, and deleting a passwordChanging the startup sequence Using IDE Drives SetupSelecting a startup device Selecting a temporary startup deviceUser Guide System programs Updating flashing Bios from a disketteUpdating flashing Bios from your operating system Appendix A. Updating system programsRecovering from a POST/BIOS update failure Appendix A. Updating system programs User Guide Appendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsInternal speaker on until carrier detected Low speaker volumeSet Pulse dial as default Set Tone Dial as defaultExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Customer replaceable unit CRU parts list Tier 1 CRUsTier 2 CRUs User Guide Appendix E. Notices Trademarks Television output noticeIndex Security integrated cable lock Page Part Number 19R2375