IBM 8087, 8088, 8086, 8090, 8089 manual What to do next

Page 29

5.Pull upward on the blue handle provided to remove the PCI riser from the computer.

6.Pivot the adapter latch upward then remove the slot cover for the expansion connector.

7.Remove the adapter from its static-protective package.

8.Install the adapter into the expansion connector in the PCI riser.

9.Pivot the adapter latch down to retain the adapter.

10.Reinstall the PCI riser and the adapter.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Closing the cover and connecting the cables” on page 23.

Chapter 1. Installing options 15

Image 29

Contents User Guide Types 8086, 8087 Types 8089 Page User Guide Types 8086, 8087 Types 8089 Page Contents Iv User Guide Conditions that require immediate action Important safety informationPower cords and power adapters General safety guidelinesService Batteries Extension cords and related devicesPlugs and outlets Heat and product ventilation CD and DVD drive safetyLithium battery notice Additional safety informationModem safety information To connect To disconnectLaser compliance statement Power supply statementInformation resources OverviewXii User Guide Features Installing optionsVideo subsystem Operating systems preinstalled varies by model type Specifications Available options Supported operating positionsHandling static-sensitive devices Locating the connectors on the front of your computer Installing external optionsLocating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Identifying parts on the system board Locating componentsInstalling memory Installing options What to do next Installing a PCI adapterWhat to do next Removing and replacing an optical drive Installing internal drivesRemoving and replacing a hard disk drive User Guide Connecting a parallel ATA hard disk drive Integrated cable lock Password protection Security featuresChanging the battery Erasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables User Guide Starting the IBM Setup Utility program Using the IBM Setup Utility programViewing and changing settings Exiting from the IBM Setup Utility programAdministrator password User passwordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting a startup device Using IDE Drives SetupSelecting a temporary startup device Changing the startup sequenceUser Guide Updating flashing Bios from your operating system Updating flashing Bios from a disketteAppendix A. Updating system programs System programsRecovering from a POST/BIOS update failure Appendix A. Updating system programs User Guide Cleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Tier 2 CRUs Appendix D. Customer replaceable unit CRU parts listTier 1 CRUs User Guide Appendix E. Notices Trademarks Television output noticeIndex Security integrated cable lock Page Part Number 19R2375