IBM 8089, 8088, 8086, 8090, 8087 manual Connecting a parallel ATA hard disk drive

Page 33

Note: A serial ATA hard disk drive does not have a master/slave jumper.

10.Depending on the type of drive you are installing, go to “Connecting a parallel ATA hard disk drive” or “Connecting a serial ATA hard disk drive.”

Connecting a parallel ATA hard disk drive

1.Locate the two-connector signal cable that comes with your computer or with the new drive.

2.Locate the hard drive cable connector on the system board. See “Identifying parts on the system board” on page 11.

3.Connect one end of the signal cable to the drive and the other to the hard drive cable connector on the system board.

4.Locate the extra four-wire power connector and connect it to the drive.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Closing the cover and connecting the cables” on page 23.

Connecting a serial ATA hard disk drive

1.Locate the signal cable that comes with the new drive.

2.Locate the SATA connector on the system board. See “Identifying parts on the system board” on page 11.

3.Connect one end of the signal cable to the drive and the other to the SATA connector on the system board.

4.Locate the extra five-wire power connector and connect it to the drive.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Closing the cover and connecting the cables” on page 23.

Chapter 1. Installing options 19

Image 33

Contents User Guide Types 8086, 8087 Types 8089 Page User Guide Types 8086, 8087 Types 8089 Page Contents Iv User Guide Conditions that require immediate action Important safety informationGeneral safety guidelines ServicePower cords and power adapters Extension cords and related devices Plugs and outletsBatteries Heat and product ventilation CD and DVD drive safetyLithium battery notice Additional safety informationModem safety information To connect To disconnectLaser compliance statement Power supply statementInformation resources OverviewXii User Guide Features Installing optionsVideo subsystem Operating systems preinstalled varies by model type Specifications Available options Supported operating positionsHandling static-sensitive devices Locating the connectors on the front of your computer Installing external optionsLocating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Identifying parts on the system board Locating componentsInstalling memory Installing options What to do next Installing a PCI adapterWhat to do next Removing and replacing an optical drive Installing internal drivesRemoving and replacing a hard disk drive User Guide Connecting a parallel ATA hard disk drive Integrated cable lock Password protection Security featuresChanging the battery Erasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables User Guide Starting the IBM Setup Utility program Using the IBM Setup Utility programViewing and changing settings Exiting from the IBM Setup Utility programAdministrator password User passwordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting a startup device Using IDE Drives SetupSelecting a temporary startup device Changing the startup sequenceUser Guide Updating flashing Bios from your operating system Updating flashing Bios from a disketteAppendix A. Updating system programs System programsRecovering from a POST/BIOS update failure Appendix A. Updating system programs User Guide Appendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Customer replaceable unit CRU parts list Tier 1 CRUsTier 2 CRUs User Guide Appendix E. Notices Trademarks Television output noticeIndex Security integrated cable lock Page Part Number 19R2375