+ / - button
■White balance : The white balance control allows you to adjust the colours to appear more natural.
●Selecting a White Balance
1. Press the + / - button, and then use the UP |
and DOWN buttons to select the white |
●Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
balance icon ( | ). The white balance |
menu bar will appear as shown. | |
2. Use the LEFT and RIGHT buttons to set the | |
white balance to the desired value. The value | |
you set wil be displayed on the LCD monitor. | |
AUTO | : The camera automatically selects the appropriate |
| white balance settings, depending on the prevailing |
| lighting conditions. |
DAYLIGHT | : For taking images outside. |
CLOUDY | : For taking images under a cloudy and overcast sky. |
Fluorescent H | : For shooting under daylight fluorescent types of three- |
| way fluorescent lighting. |
Fluorescent L | : Shooting under white fluorescent lighting. |
TUNGSTEN | : For shooting under tungsten (standard light bulb) lighting. |
CUSTOM | : Allows the user to set the white balance according to |
| the shooting condition. |
Different lighting conditions may cause a colour cast on your images.
3.Press the + / - button again. The value you set will be saved and White Balance setup mode will end.
1.Select the CUSTOM ( 
) menu of the White Balance.
2.Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button.
3.Your custom white balance value is stored.
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will be remain effective until it is overwritten.
Measure:Shutter |
[White paper]
《30》