PictBridge : Picture Selection
■ If you select [Computer] sub menu in the [USB] setup menu, [Connecting Computer] message will display when you connect the camera to your printer and the connection will not be established.
●Setting the Number of Copies to Print
-Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below.
In this case, press the Printer button. [Connecting Printer] message will display and the Easy printing mode will be selected.
*In some instances the camera may not connect to the printer, this will depend on the manufacturer of the printer.
W◀ | 0 Prints | ▶T |
Set:OK | Exit:Shutter | |
[When [One Pic] is selected] | ||
W◀ | 0 Prints | ▶T |
Exit:ShutterSet:OK
[When [All Pics] is selected]
■Easy printing
When you connect the camera to printer in the Play back mode, you can print a picture easily.
-Pressing the Printer ( 
) button :
The currently displayed image will be printed with the printer’s default setting.
-Pressing the Left / Right button : Selects a previous / next image.
◀
▶
Menu:Ok
-Press the Up / Down button to select the number of prints.
-When [One Pic] is selected : Use the Left / Right button to select another picture. After selecting another picture, select the number of prints for another picture.
-After setting the number of prints, press the OK button to save.
-Press the Shutter button to return to the menu without setting the number of prints.
■Select pictures to print
PictBridge : Print Setting
1. Press the Menu button. |
|
|
|
|
|
| |
2. The [Images] menu will appear. |
| IMAGES | |
| One Pic | ||
3. Use the UP and DOWN buttons to select the desired |
| ||
| All Pics | ||
submenu value, and then press the OK button. |
|
|
|
When [One Pic] is selected : |
|
|
|
| Move: |
| |
The PictBridge function will be applied only to the |
|
| |
|
|
| |
|
|
| |
picture currently displayed. |
|
|
|
When [All Pics] is selected : |
|
|
|
The PictBridge function will be applied to all pictures, excluding movie clips and voice files.
■AUTO SET
1.Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab.
2.Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are automatically changed.
AUTO SET |
No |
Yes |
Move: |
《50》