Samsung L Series manual Important notes

Page 59

Important notes

Be sure to observe the following precautions!

This unit contains precision electronic components. Do not use or store this unit in the following locations.

-Areas exposed to severe changes in temperature and humidity.

-Areas exposed to dust and dirt.

-Areas exposed to direct sunlight or the inside of a vehicle in hot weather.

-Environments where there is high magnetism or excessive vibration.

-Areas with high explosives or highly flammable materials.

Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothball), high temperature and high humidity.

Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time

Sand can be particularly troublesome to cameras.

-Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand.

-Doing so may result in failure or may permanently render the camera unusable.

Handling the camera

-Never drop the camera or subject it to severe shocks or vibrations.

-Protect the large size LCD monitor from an impact.

When this camera is not being used, keep it in the camera case.

-Avoid obstructing the lens or the flash when you capture an image.

-This camera is not waterproof.

To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.

-If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.

Extremes in temperature may cause problems.

-If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.

Caution on Using the Lens

-If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor.

-Pay attention not to get fingerprints or foreign substances on the surface of the lens.

If the digital camera is not used for a long period, an electric discharge can occur.

It is a good idea to remove the battery and the memory card if you do not intend to use the camera for an extended period of time.

If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card.

Camera Maintenance

-Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.

If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.

This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use.

Do not attempt to disassemble or modify the camera.

58

Image 59
Contents Page Take a picture Instructions Getting to know your camera《2》 Contents Dpof Standard FAQ USBDpof Camera case Camera strap System chartIdentification of features AV OUT/ USB 《8》 Text Close UP Icon Mode Sunset Dawn Connecting to a Power SourceMode Movie Clip Auto Program Play Icon Mode Scene Night PortraitInserting the memory card Instructions on how to use the memory card 30FPS 15FPS AEB RGB LCD monitor indicatorISO Press the menu button and a menu will display Changing the recording modeStarting the recording mode 《16》 Fireworks ChildrenLandscape BacklightThings to Watch Out for When Taking Pictures Zoom W / T button Using the camera buttons to set the camera《20》 Voice recording / Voice memo / UP button Macro / Down buttonWide Tele Auto Focus lockFlash / Left button 《23》 Self-timer / Right button Menu / OK button Mode buttonMode button Effect button Special Effect Colour Special Effect Preset focus framesMovie Clip frame stabiliser White Balance + / buttonCustom DaylightCloudy TungstenSize Mode SETShooting How to use the menuQuality MeteringFull Mode SetMode Still & MovieQuality / Frame rate SizeContinuous shot MeteringOSD On Screen Display information Starting play mode《37》 Using the camera buttons to adjust the camera Thumbnail / Enlargement button Voice memo / Up button Delete button Play & Pause / Down buttonLeft / Right / Menu / OK button Rotate SlideOSD InformationCustom SET ResetImages Auto SETStarting the slide show Rotating an image On Screen Display informationProtecting images ResizeCopy To Card Deleting imagesDpof Index DpofPictBridge Dpof Print sizePictBridge Picture Selection PictBridge Print SettingMenu PictBridge PrintDutch Dansk Svenska Suomi Bahasa Polski PictBridge Reset Setup menuEnglish Français Deutsch Español Italiano PAL File nameLCD Format Auto power offAuto Focus lamp Setting up the Date / Time / Date typeSelecting Video out type LCD brightnessLogo Setting up the Mycam menuStart up sound Important notes 《59》 Before contacting a service centre Specifications 《62》 About the software Software NotesSystem Requirements Setting up the application software 《65》 Starting PC mode 《67》 Removing the removable disk Setting up the USB Driver for MACUsing the USB Driver for MAC Removing the USB Driver for Windows 98SE Digimax Master《70》 《71》 FAQ 《73》 Correct Disposal of This Product Samsung Techwin FCC notice《76》 6806-4307