Important notes
■Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction.
■When images are uploaded or downloaded (when the charger and USB cable are inserted into the cradle (optional) at the same time), the data transfer may be affected by static electricity.
In this case, disconnect and
■Before an important event or going on a trip, you should check the camera condition.
-Take a picture to test the camera's condition, and prepare spare batteries.
-Samsung cannot be held responsible for camera malfunctions.
Warning indicator
■There are several warnings that may appear on the LCD display
Card Error!
•Memory card error
→Turn off the camera power and turn it on again
→Insert the memory card again
→Insert the memory card and format the memory card. (p.54)
Card Locked!
•The memory card is locked
→SD memory card : Slide the write protect switch to the top of the memory card
Memory Full!
•There is insufficient memory capacity to take an image
→Insert a new memory card
→Delete unnecessary image files to free up some memory
No Image!
•There are no images stored on the memory
→Take images
→Insert a memory card that is holding some images
File Error!
•File error
→Format the memory card
•Memory card error
→Contact a camera service centre
Low Battery!
•There is low battery capacity
→Insert fresh batteries.
Low Light!
•When taking pictures in dark places
→Take pictures in Flash Photography mode.
Out Of Number
•When selecting too many printing pages in the PictBridge menu.
→Select printing page within the limitation.