LCD brightness
■You can adjust the LCD brightness.
| SETUP |
SOund | Dark |
USB | Normal |
LCD | Bright |
Video Out |
|
Quick View |
|
Back: | Set:OK |
Selecting Video out type
INFORMATION
●When using a TV as an external monitor, you will need to select the external or AV channel of the TV.
●There will be a digital noise on the external monitor, but it is not a malfunction.
●If the image is not in the centre of the screen, use the TV controls to centre it.
●The menu functions are the same as those indicated on the LCD monitor.
Selecting Video out type
■The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
| SETUP |
USB |
|
LCD | NTSC |
Video Out | PAL |
Quick View |
|
Reset |
|
Back: | Set:OK |
Quick view
■If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
[Off] : The quick view function can’t be activated.
[0.5, 1, 3sec] : The captured image is briefly displayed during the selected time.
| SETUP |
USB | off |
LCD | 0.5 sec |
Video Out | 1 sec |
Quick View | 3 sec |
Reset |
|
Back: | Set:OK |
Yellow - Video White - sound
Initialisation
■All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed.
INFORMATION
●NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
● PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
If [No] is selected : Settings will not be restored to their defaults.
If [Yes] is selected : All settings will be restored to their defaults.
| SETUP |
USB |
|
LCD |
|
Video Out |
|
Quick View | No |
Reset | Yes |
Back: | Set:OK |
《56》