Removing the removable disk
■Windows 98/98SE
1.Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on.
2.Unplug the USB cable.
■Windows 2000/ME/XP
(The illustrations may differ from those shown depending on the Windows O/S.)
1.Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on.
2.
on the task bar.
3.The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.
4.The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button.
5.A [Safe to Remove Hardware] window will open. Click the [OK] button.
6.A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1.A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver.
2.Check the MAC OS version during
This camera is compatible with MAC OS 10.0 ~ 10.3.
3.Connect the camera to the Macintosh and turn the camera power on.
4.A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1.Double click a new icon on the desktop and the folder in the memory will be displayed.
2.Select an image file and copy or move it to MAC.
CAUTION
●For Mac OS 10.0 or later : First complete uploading from computer to camera and then remove the removable disk with the Extract command.
●If a movie clip can’t play back on the Mac OS, please visit the following site (http://www.divx.com/divx/mac/) and download the codec.
Or, use a media player that supports the Xvid codec (Mplayer).
《68》