Sharp MD-E9000H operation manual Listening to a MiniDisc, To remove a MiniDisc

Page 18

Listening to a MiniDisc (continued)

MD Playback - Listening to a MiniDisc -

To interrupt playback:

Press the MD 06 button.

To resume playback from the same point, press the MD 06 button again.

To stop playback:

Press the MD ■ button.

To remove a MiniDisc:

Whilst in the stop mode, press the MD 7 button.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Caution:

●If TV or radio interference occurs during MiniDisc operation, move the unit away from the TV or radio.

●Although MiniDiscs will not normally skip due to vibration, you may hear skipping in the sound if there is continuous vibration.

If the volume is turned up too high, sound skipping may occur depending on the contents of the MiniDisc.

If this happens, turn the volume down and the skipping should stop.

●If an error message is displayed during MiniDisc operation, see “Error Messages” on page 45.

■To locate the beginning of a track

To move to the beginning of the next track:

Press the 4 button for less than 0.5 seconds during playback.

●You can skip to any track by pressing the 4 button repeatedly until the de- sired track number appears.

To restart the track being played:

Press the 5 button for less than 0.5 seconds during playback.

●You can skip to any track by pressing the 5 button repeatedly until the de- sired track number appears.

■To locate the desired portion

For audible fast forward:

Press and hold down the 4 button during playback.

For audible fast reverse:

Press and hold down the 5 button during playback.

Notes:

●Normal playback will resume when the 5 or 4 button is released.

●When the end of the last track is reached during fast forward, “END” will appear in the display and MiniDisc operation will be paused. When the beginning of the first track is reached during fast reverse or the 5 button is released, the unit will enter the playback mode.

●The 5/3 or 2/4 button on the remote control allows you the same opera- tions.

18	Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

*MD9000H-E17-18

18

2001.4.20, 2:07 AM

Image 18

Contents MD-E9000H Special Notes Special NotesContents Precautions Volume controlGeneral Accessories General Information Precautions / AccessoriesCare of compact discs 7 8 9 10 11 12 13 16 17 Controls and IndicatorsGeneral Information Controls and Indicators Front panelDisplay Rear PanelControls and Indicators Remote ControlTweeter Woofer Bass Reflex Duct Speaker Terminals Speaker SystemSpeaker connection Placing the speaker systemAerial connection Connecting the AC power leadSystem Connections For Use ConnectionsTest of the remote control Remote ControlBattery installation Preparation for Use Remote ControlGeneral Control Demonstration modeTo turn the power on To change the display brightness 2 levelsBass control Adjusting the volumeSound Control EqualiserSetting Basic Operation Setting the ClockTo check the time when the power is on Press the CD 06 button to start playback from track Listening to a CDCD Playback Listening to a CD To interrupt playbackListening to a CD To locate the beginning of a trackTo locate the desired portion Listening to a MiniDisc MD Playback Listening to a MiniDiscPress the MD 06 button to start playback Listening to a MiniDisc To remove a MiniDiscProgrammed Play Programmed PlayDirect Play Repeat or Random Play Repeat or Random PlayDirect Play Switching the display during MD playback Switching the DisplaySwitching the time display Advanced CD/MD Playback Switching the DisplayRadio Listening to the Radio Auto tuningListening to the Radio To receive an FM stereo transmissionTo recall a memorised station Listening to a Memorised StationMemorising a station To clear all memorised stationsInformation provided by RDS Using the Radio Data System RDSUsing Data System RDSRDS To erase all of the contents of preset memory Using the Radio Data System RDSUsing the Auto Station Programme Memory To stop the Aspm operation before it is completeTo recall stations in memory To specify programmed types and select stations PTY searchIf you select the traffic programme To cancel the EON stand-by mode EON-PTYTo automatically play the traffic information EON-TIAbout the TP and TA indicators MeaningAbout track numbers Before Recording to a MiniDiscDifferences from tape recordings Disc writing TOCRecording to a MiniDisc from a CD Recording to a MiniDisc from a CD One Touch EditingMD Recording Recording to a MiniDisc from a CD To record without using One-Touch Editing MD RecordingLoad a CD and a recordable MiniDisc Press the REC button Recording to a MiniDisc from a CD Recording the first several tracks of a CDProgrammed recording from a CD Press the MD 06 button Recording to a MiniDisc from the RadioMD Recording Recording to a MiniDisc from the Radio To interrupt recordingMD Editing Titling a MiniDisc Titling a MiniDiscCreating disc and track names Press the MD button and load a MiniDisc seeMiniDiscaTitling To combine tracks Editing a Recorded MiniDiscTo divide a track MD Editing Editing a Recorded MiniDiscTo move a track To move programmed tracks programmed moveTo erase all of the tracks at once Editing a Recorded MiniDiscTo erase a track To erase programmed tracks programmed EraseTimer and Sleep Operation Timer playback/Timer recordingAdvanced Features Timer and Sleep Operation To cancel the timer operation Timer and Sleep OperationTo confirm the timer setting Sleep operationSimultaneous sleep and timer operation To confirm the remaining sleep timeListening to the playback sounds from Connected device HeadphonesEnhancing Your Stereo System Recording on a MiniDiscWhat is a What is a MiniDisc?Helpful tip when attaching a label MiniDisc System LimitationsError Messages Error MessagesWhen an error message is displayed, proceed as follows CD player Troubleshooting ChartTroubleshooting Chart MiniDisc TunerMaintenance Troubleshooting ChartAmplifier SpecificationsSpecifications MiniDiscMemo Memo Sharp Corporation