Sharp MD-E9000H operation manual To record without using One-Touch Editing, MD Recording

Page 33

Notes:

●When the CD playing time is longer than the available MiniDisc recording time, the recording process will not start even when the HIGH or NORMAL button is pressed.

Total number of recordable tracks	Available recording time
(from the first track)

●To record as many tracks as possible, press the HIGH or NORMAL button again. Recording will start. However, when the MiniDisc runs out of space, "DISC FULL" will be displayed and the CD and MiniDisc will stop.

If the available recording time on the MiniDisc is less than the length of the first track on the CD, recording will not be performed.

Note for high speed recording:

If the source CD is of poor quality due to scratches or dirt, recording at high speed may be unreliable, and it may be recorded with noise or pauses. If this occurs, set recording speed to normal.

Notes for long recording mode:

●Tracks recorded in 2 times long recording or 4 times long recording mode cannot be played with units that do not support these modes.

●On such a unit, “LP:” is displayed at the beginning of the track and no sound is heard. (The operation and the display may vary depending on the unit.)

Caution for 4 times long recording (LP4):

To realise 4 times long stereo recording, special compression methods are used. Due to the high levels of compression, the sound quality may be adversely affected and some noise may be recorded. If sound quality is the main concern, 2 times long or normal recording is recommended.

MD-E9000H

■To record without using One-Touch Editing

1 Load a CD and a recordable MiniDisc.

2 Press the REC button.

●The unit will enter the recording stand-by mode.

	3	Programme desired tracks from a CD (see page 19).			CD -
4		Press the CD 06 button.		Recording	CD -
					fromMiniDiscato a
To stop recording:					fromMiniDiscato a
To stop recording:
Press the MD ■ button.
● Recording will stop and the track numbers will be written on the MiniDisc.
				MD Recording
					-

1

2

3

4

5

6

7

8

9

10

11

12

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)	33

*MD9000H-E31-35

33

2001.4.20, 2:13 AM

Image 33

Contents MD-E9000H Special Notes Special NotesContents Precautions Volume controlGeneral Accessories General Information Precautions / AccessoriesCare of compact discs General Information Controls and Indicators Controls and Indicators7 8 9 10 11 12 13 16 17 Front panelRear Panel DisplayRemote Control Controls and IndicatorsSpeaker connection Speaker SystemTweeter Woofer Bass Reflex Duct Speaker Terminals Placing the speaker systemSystem Connections Connecting the AC power leadAerial connection For Use ConnectionsBattery installation Remote ControlTest of the remote control Preparation for Use Remote ControlTo turn the power on Demonstration modeGeneral Control To change the display brightness 2 levelsSound Control Adjusting the volumeBass control EqualiserSetting Basic Operation Setting the ClockTo check the time when the power is on CD Playback Listening to a CD Listening to a CDPress the CD 06 button to start playback from track To interrupt playbackListening to a CD To locate the beginning of a trackTo locate the desired portion Listening to a MiniDisc MD Playback Listening to a MiniDiscPress the MD 06 button to start playback To remove a MiniDisc Listening to a MiniDiscProgrammed Play Programmed PlayDirect Play Repeat or Random Play Repeat or Random PlayDirect Play Switching the time display Switching the DisplaySwitching the display during MD playback Advanced CD/MD Playback Switching the DisplayListening to the Radio Auto tuningRadio Listening to the Radio To receive an FM stereo transmissionMemorising a station Listening to a Memorised StationTo recall a memorised station To clear all memorised stationsUsing Using the Radio Data System RDSInformation provided by RDS Data System RDSRDS Using the Auto Station Programme Memory Using the Radio Data System RDSTo erase all of the contents of preset memory To stop the Aspm operation before it is completeTo recall stations in memory To specify programmed types and select stations PTY searchIf you select the traffic programme EON-PTY To cancel the EON stand-by modeEON-TI To automatically play the traffic informationMeaning About the TP and TA indicatorsDifferences from tape recordings Before Recording to a MiniDiscAbout track numbers Disc writing TOCRecording to a MiniDisc from a CD Recording to a MiniDisc from a CD One Touch EditingMD Recording Recording to a MiniDisc from a CD To record without using One-Touch Editing MD RecordingLoad a CD and a recordable MiniDisc Press the REC button Recording to a MiniDisc from a CD Recording the first several tracks of a CDProgrammed recording from a CD MD Recording Recording to a MiniDisc from the Radio Recording to a MiniDisc from the RadioPress the MD 06 button To interrupt recordingCreating disc and track names Titling a MiniDiscMD Editing Titling a MiniDisc Press the MD button and load a MiniDisc seeMiniDiscaTitling To divide a track Editing a Recorded MiniDiscTo combine tracks MD Editing Editing a Recorded MiniDiscTo move programmed tracks programmed move To move a trackTo erase a track Editing a Recorded MiniDiscTo erase all of the tracks at once To erase programmed tracks programmed EraseTimer and Sleep Operation Timer playback/Timer recordingAdvanced Features Timer and Sleep Operation To confirm the timer setting Timer and Sleep OperationTo cancel the timer operation Sleep operationTo confirm the remaining sleep time Simultaneous sleep and timer operationEnhancing Your Stereo System HeadphonesListening to the playback sounds from Connected device Recording on a MiniDiscHelpful tip when attaching a label What is a MiniDisc?What is a MiniDisc System LimitationsError Messages Error MessagesWhen an error message is displayed, proceed as follows Troubleshooting Chart Troubleshooting ChartCD player MiniDisc TunerTroubleshooting Chart MaintenanceSpecifications SpecificationsAmplifier MiniDiscMemo Memo Sharp Corporation