D14041.02 January 2008 | TANDBERG FieldView Device User Guide |
2.5. Logging On & Off
2.5.1. Logging on
If your site requires a login, you will be prompted with a Login screen, as shown to the right. See your site administrator for user name and password.
If the FieldView Device has not been configured, use the default user name and password.
•User name: admin
•Password: admin
We strongly recommend that you change the administrator password from the default admin as soon as you log in.
To login to the FieldView Device:
1.Tap the Username field with the stylus. An on screen keyboard appears.
2.Use the stylus to tap characters on the keyboard to enter them into the Username field.
3.Use the same process to enter your password.
4.Tap the OK button to finish logging in.
Note: If your site administrator has enabled anonymous login, a Skip button is available to bypass the login process.
2.5.2Logging off To log out:
1. From the standard Viewfinder display window, press and release the Display button three times (or until the Main Menu appears).
2. Select Signout from the Main Menu by tapping it with the stylus.
2.6.Inserting and Removing an SD Memory Card
The FieldView Device features an SD memory card slot for recording of video and snapshots, and to support configuration and system upgrades and also to support future capabilities. To insert or replace an SD memory card:
1.Open the SD memory card slot cover on the side of the FieldView Device, as shown at right.
2.If there is already an SD memory card in place, push and release it gently to release it from the slot.
3.Pull the card out. It should slide out easily.
4.Push the card gently in until it clicks into place.
5.Close the compartment cover.
Note: Do not remove the SD card while recording. This can corrupt the card data.
Keyboard appears when you select a text field. Tap the keys with the stylus to enter text.
To move the onscreen keyboard to a new location on the screen, touch the stylus to the edge of the keyboard image and drag it to a new location.
7