TANDBERG D14041.02 manual Navigation Pad Buttons, Button Function Menu Function, Soft Keys

D14041.02 January 2008 TANDBERG FieldView Device User Guide

1.3.2. Navigation Pad Buttons

These context-sensitive buttons control audio volume, microphone mute and the front light. They also function as command buttons and directional buttons for the menus.

Button	Function	Menu Function
	Start or accept call (Send)	OK or Enter
	End a call or reject an incoming call	Cancel
	invitation
	Increase volume	Up arrow
	Microphone mute	Left arrow
	Decrease volume	Down arrow
	Front illumination light on/off	Right arrow
	Enter	Accept

1.3.3. Zoom/Manual Focus Controls

The Zoom buttons are located on the back of the FieldView Device, directly above the Navigation Pad. These allow the Operator to set zoom levels on the camera or to set focus manually (see page 11).

1.3.4. Indicators

Indicator	Name	Explanation
	Power mode indicator	Green = On or Standby
	Network indicator	Green = Network available
		Off = Network unavailable
	Battery/power	Orange = Battery is charging
	indicator	Off = Battery is charged or power is not
		connected
	Stream/record	Red = streaming/recording on.
		Off = streaming/recording off
	Network connector	The Ethernet Port (shown as #15 on the
		diagram on page 2) also includes an LED
		indicator:
		Yellow On = a wired network link exists.
		Yellow Flashing – indicates wired network
		activity
		Yellow Off = no wired network link
		The green LED is not used at this time.

1.3.5. Soft Keys

Some screens contain on-screen keys or buttons, e.g., Accept or Cancel on a configuration screen. You can select these buttons by tapping the key with your stylus, or by pressing Navigation pad keys.

Stream/record indicator

3