TOA Electronics C-CV44-3 NTSC instruction manual Specifications, Accessories

9. SPECIFICATIONS

Model No.	C-CV44-3 (NTSC)		C-CV44-3 (PAL)
Power Source	24 V AC, 50/60 Hz, or 12 V DC
Power Consumption	2 W
Image Device	1/4” IT-CCD
Number of Effective Pixels	768 (H) x 494 (V), 380,000 pixels		752 (H) x 582 (V), 440,000 pixels
Scanning System	2:1 interlace
Scanning Frequency	15.734 kHz (H), 59.94 Hz (V)		15.625 kHz (H), 50 Hz (V)
Monitor Output	VBS1.0 V(p-p), 75 Ω	, RCA pin jack
Video Output	VBS1.0 V(p-p), 75 Ω	, water-resistant connector
Synchronizing System	Internal synchronization
Resolution	H: 480 lines (center), V: 350 lines		H: 470 lines (center), V: 410 lines
S/N Ratio	48 dB
Minimum Illumination	3 lx (50 IRE)		3 lx (350 mV)
White Balance Mode	ATW
Focal Length	f=3.0 mm – 6.0 mm
Maximum Aperture Ratio	1:1.2 – 1.5
Iris	Automatic iris
Angle of View	71.9º– 36º(H), 52º– 26.8º(V)
Control Switch	ON/OFF (for focus adjustment)
Other Functions	Backlight compensation, shutter speed, iris adjustment
Shutter Speed	1/60,1/100		1/50,1/120
Water Resistance	Equivalent to IP66
Operating Temperature	– 10ºC to + 50ºC
Operating Humidity	Under 90% RH (no dew condensation)
Finish	Front cover,rear cover,sunshade : Aluminum, light gray, paint
	Mounting bracket : Stainless steel, light gray, paint
Dimensions	ø92 x 236 (D) mm
Weight	1.1 kg

The specifications of this camera are subject to change without notice.

• Accessories
Mounting bracket	1
Cable with water-resistant cap (2 m)	1
Camera mounting bolt	2
(washer-installed M8 x 14mm stainless steel hex bolt)
Insulation spacer	2

15