TOA Electronics C-CV44-3 NTSC instruction manual Mounting Example 3 Ceilings or walls

[Mounting Example 1] Ceilings or walls

[Mounting Example 2] Walls

Use this method when the camera orientation cannot be sufficiently adjusted in Mounting Example 1.

Up

Down

[Mounting Example 3] Ceilings or walls

Use this method when the camera angle does not need to be adjusted after camera installation is completed.

Note: If the bracket is only fixed at one place using the bracket mounting bolt, the bracket could rotate or the bolt could become loose. To prevent this, be sure to securely fix the bracket at two more places using self-tapping screws or other anti-rotation type screws.

2. Install female-thread anchors in the ceiling or wall and mount the camera mounting bracket.

Female-thread anchor

M8 or W 3/8

Ceiling

Mounting bracket

Plain washer

Spring washer

Bracket mounting bolt M8 or W 3/8

Female-thread anchor

M8 or W 3/8

Ceiling

Mounting bracket

Anti-rotation screw

(such as self-tapping screws)

Plain washer

Spring washer

Bracket mounting bolt

M8 or W 3/8

7