ParkerVision 1-CCD manual CameraMan Jacks and Switches, Connection Jacks

Meet Your CameraMan

CameraMan Jacks and Switches

All of the connection jacks and configuration switches described below appear on the back of your CameraMan .

!Do not use telephone cords or jacks for any of the following connections. They are wired differently.

Connection Jacks

•PVI COM Jack – A standard 6-conductor RJ-11 jack used by ParkerVision keypads as a communication interface to the camera system. For example, a hard-wired keypad attaches here.

•RS-485 Jack – A standard 4-conductor modular telephone jack used for RS-485 communications between the camera and other ParkerVision devices. You can use this jack to network multiple cameras or to connect appropriate ParkerVision-approved peripherals using a ParkerVision T-connector.

• Auxiliary Communication Port – Provides communications to select ParkerVision peripherals and provides capability for future expansion.

•RS-232 Port – A standard DB-9 female connector that provides RS-232 communications to external devices such as PCs or other vendor control systems.

•S-VIDEO Jack – A standard min-DIN jack that provides direct S-VIDEO video output. S-VIDEO cable is not provided.

•Cable Restrainer – Helps keep cables from becoming dislodged or hindering the pan and tilt of the camera.

•Composite Video Jack – A standard BNC-type jack that provides direct composite video output. Video cable is not provided.

•DC Power Jack - Power input for the CameraMan camera. Plug only a ParkerVision power supply (included) into this jack. Do not use any other type of power supply. This item is not used with Presenter Systems.

•Power – Use this switch to power on/off the CameraMan camera.

•Tally Light Port – Provides output and external control for the CameraMan Tally Light.

•Gen Lock Connector – Provides input and external control for setting up Gen Lock.

Gen Lock Connector

	S-VI DEO
SWITCH BA NK		SWITCH BA NK
-A-		-B-
	COM POSI TE

1	2	3	4	5	6	7	8	BAS E UNIT	1	2	3	4	5	6	7	8	TALLY LIGHT
								ADDRESS									INTERFACE
UP
DOWN

Back of 1-CCD camera with connector box attached and configuration plate removed.

Ports and Jacks

TALLY LIGHT

INTERFACE

Tally Light Port

!If you purchased a Presenter or Deluxe Camera System, refer to their respective manuals for information on the Main Docking Station that replaces the connector box.

1-10CameraMan 1-CCD Camera System Installation and Operations Manual