ParkerVision 1-CCD manual Configuration Table, Down

Installation and Startup

Configuration Table

!After changing any switch settings, turn off the camera and then turn it back on to activate the change.

Switch			DOWN			UP	Factory
Number	Description		Position		Position		Default		Function
A1		Lens Select	Normal		Adapter		DOWN	Use this switch with Personal Locator and Deluxe Camera Systems to indicate the use
								of a lens adapter. Refer to their manuals for more information.
A2		Sub-carrier	0°		180°		DOWN	Use this switch to change the sub-carrier phase from 0° to 180° .
		Coarse
	Adjustment
A3	--		--		--		DOWN	NOT USED
A4		Lens	Wide		--		DOWN	Use this switch with switch A1 to select the type of lens adapter being used. Always
		Converter						set to the DOWN position.
		Type
A5 & A6	--		--		--		DOWN	NOT USED
A7		Baud Rate	9600		19200		UP	Use this switch to configure the camera's baud rate for the RS-232 and RS-485 ports.
A8	Memory Lock		Lock		Unlock		UP	For the majority of applications, use this switch in the UP (Unlock) position to prevent
								programmed settings from being accidentally overriden.
Video Out	Composite/S-		Composite		S-VIDEO		DOWN	Use this switch to set the video source to composite (DOWN) or S-VIDEO (UP).
		VIDEO					!	You must choose one source, you cannot use them simultaneously.
Base Unit	--		--		--		Zero (0)	Use this 16-position rotary switch to set the unique identification number of your
Address								camera. If you use the optional keypad, SHOT Director, or another control system,
								refer to the documentation provided with those accessories for proper configuration.
								For setting up a camera network, refer to Appendix A, Multiple Camera Applications.
B1		Protocol	High		Basic		DOWN	Use this switch to select the communication protocol to be used by the RS-232 and
			Reliability					RS-485 ports. The High Reliability protocol includes some advanced error checking
								that is not performed in the Basic protocol.
B2	Data Source		Local		Remote		DOWN	Use this switch to determine whether the camera will receive data from a local source
								such as a keypad, or from a remote source, such as a SHOT Director.
B3	Digital Zoom			Off		On	DOWN	Use this switch to turn on or off the digital zoom feature.
B4	RF Command		Enable		Disable		DOWN	Use this switch to enable/disable the camera to respond to commands sent from an
							!	RF Keypad.
								When using multiple cameras networked on the RS-485 bus, only one camera should
								have its RF receiver enabled. Set switch B4 on the other cameras to Disable (UP).
B5		Preset Save	Manual		Auto		DOWN	Use this switch to determine how the preset settings will be saved. DOWN saves your
			Gain, Iris		Settings			Manual Gain, Iris and Focus settings. UP saves only the Auto settings for presets and
			and Focus					autoTRACK views.
B6 & B7	--		--		--		DOWN	NOT USED
B8		Interlink	Enable		Disable		DOWN	Use this switch in multi-camera applications. The DOWN position passes all commands
								through the RS-485 communication bus to the appropriate camera. This switch has no
								effect in a single camera application.

CameraMan 1-CCD Camera System Installation and Operations Manual 2-17