BNC video output
Bypass the video input signal to additional terminal or surveillance equipment.
RCA audio input
The audio input is connected by RCA connector of
Status LED
The Video Server provides a LED to show its status. Please refer to the appendix "Troubleshooting” for detail.
Rear Panel
Ethernet 10/100 socket
Connect to Ethernet network with a UTP category 5 cable that cannot exceed 100 meters.
General I/O terminal block
1 | DI- | INPUT (Initial state of DI is low) |
2 | DI+ | INPUT (Max. 50mA, 12VDC) |
3 | SW_COMMON | OUTPUT (open from SW_OPEN at initial state) |
|
| (close with SW_OPEN when set DO to ON) |
4 | SW_NOPEN | OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) |
The Video Server provides a general I/O terminal block with one digital input and one
- 8 -
www.vivotek.com