2 HOW TO MAKE COPIES

Using Bypass Tray

Place paper on the bypass tray when you use the following media types as copy paper:

yThick paper (21 lb. Bond to 90 lb. Index)

ySpecial media types such as tracing paper, sticker labels or overhead transparencies

yStandard size paper which cannot be placed in a drawer (e.g. ST-R)

Using the bypass tray is recommended also for copying on standard-size paper other than those placed in the drawers. The following sizes are available for bypass copying:

Media type

Paper size

Maximum sheet

capacity *1

 

 

Plain paper

LT format:

100 sheets (17 lb. Bond)

(17 - 20 lb. Bond)*2

LD, LG, LT, LT-R, ST-R, COMP, 13"LG

100 sheets (20 lb. Bond)

 

A/B format:

 

THICK PAPER 1

1 sheet

A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO

(21 - 28 lb. Bond)

(21 - 28 lb. Bond)

 

 

 

 

THICK PAPER 2

 

1 sheet

(29 lb. Bond - 90 lb. Index)

 

(29 lb. Bond - 90 lb. Index)

Tracing paper

 

1 sheet

(20 lb.)

 

 

Sticker labels

 

1 sheet

Transparencies*3

LT only

1 sheet

*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended paper is used. See the following page for the TOSHIBA-recommended paper:

P.31 “Recommended paper”

*2 13 to 16 lb. Bond paper can be used if it is set on the bypass tray sheet by sheet.

*3 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

When you place paper of a larger size, pull out the paper holder before you start bypass copy- ing.

48 Using Bypass Tray

Page 50
Image 50
Toshiba DP-1810 manual Using Bypass Tray, Media type Paper size Maximum sheet Capacity *1