3 COPYING FUNCTIONS

Specifying both the sizes of the original and the copy paper

1 Place paper in the drawer.

2 Place the original.

3 Press the [ORIGINAL] button several times until the lamp of the desired original size is lit.

e.g.) Selecting LG for the original

4 Press the [COPY] button several times until the lamp of the desired paper size is lit.

e.g.) Selecting LT for copy paper

yYou can select the desired paper size with the [DRAWER] button in the same proce- dure.

yWhen standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this size as “OTHER” size in advance.

P.37 “Registering other standard sizes”

The most appropriate reproduction ratio for both the sizes of the original and the copy paper is set.

5 Select the other copy modes as required, and then press the [START] button.

58 Zooming In/Out Copy Image

Page 60
Image 60
Toshiba DP-1810 manual Specifying both the sizes of the original and the copy paper