1 Place paper in the drawer.

2 Press the [COPY] button several times until the lamp of the desired paper size is lit.

e.g.) Selecting LT size

You can select the desired paper size with the [DRAWER] button in the same procedure.

3 Press the APS/AMS selecting button until the AMS lamp is lit.

4 Place the original on the Automatic Document Feeder (optional).

5 Select the other copy modes as required, and then press the [START] button.

Copying is performed with the most suitable reproduction ratio for the specified paper size.

If the [FUNCTION CLEAR] lamp is blinking and copying stops

The direction of the original placed is not correct. Press the [FUNCTION CLEAR] button to exit the original. Then rotate the original by 90 degrees to place it in the correct direction.

Zooming In/Out Copy Image 57

Page 59
Image 59
Toshiba DP-1810 manual If the Function Clear lamp is blinking and copying stops