Toshiba DP-1810 manual Placing Originals, Acceptable originals, Setting position Type of origi

2 HOW TO MAKE COPIES

Placing Originals

Acceptable originals

Booklets, three-dimensional objects and some types of special media can be placed on the orig- inal glass, as well as plain paper. When the Automatic Document Feeder (optional) is used, a stack of plain paper originals can be automatically scanned one by one.

Setting position	Type of origi-	Maximum	Acceptable sizes for auto-	Remarks
	nals	size	matic size detection*1
Original glass	Plain paper	11.69" x 17.01"	Not acceptable for automatic	*3
	Special media		size detection
	types*2
	Booklets
	3-dimensional
	objects
Automatic	Plain paper		LD, LG, LT, LT-R, COMP, ST-R	*4, *5, *6
Document Feeder			of standard sizes
(optional)

*1 The automatic size detection function is not enabled for A/B format.

*2 “Special media types” refers to special paper which is not acceptable for the Automatic Document Feeder (optional), such as overhead transparencies or tracing paper.

*3 Do not place heavy objects (9 lb. or more) and do not press on it with force.

*4 Its paper weight should be between 13.3 lb. and 33.8 lb.

*5 Some media types may not be used.

*6 ST size originals must be placed in a landscape direction.

Maximum number of originals scanned in one go

Up to 250 original sheets can be scanned at one time. When the number of sheets to be scanned exceeds 250 or the built-in memory in the equipment becomes full during the scanning of the copy job, scanning stops, the [FUNCTION CLEAR] lamp blinks and the [START] lamp is lit.

To copy the data scanned so far, press the [START] button. To delete them, press the [FUNC- TION CLEAR] button.

When non-sort copying or sort copying for one set is performed, only the [FUNCTION CLEAR] lamp blinks. Thus only data deletion is possible. After doing this, perform copying again with the original divided.

40 Placing Originals