Sunwave Tech SRC-3810, 3815 manual Using Pre-Code to Program Devices, Manually Selecting the Code

SRC-38 SERIES User’s Manual

Using Pre-Code to Program Devices

Follow these instructions to program a device using preprogrammed codes.

Press or to select PRE-CODE，and then press OK.

Manually Selecting the Code

1.Turn on the device you want to program the SRC- 3810/3815 to control.

2.Select the device (for example TV).

3.Check the preprogrammed code list that was bundled with the SRC-3810/3815 for the four-digit code number of your device. If no code is displayed, that means this device has no pre-code.

4.Enter the four-digit code number and press to confirm the entry.

Note: If the code only has one digit (for example, 0001), you do not have to input the preceding zeros; in this example, press ‘1’.

5.Press the POWER button to test the code. The device you are trying to control should turn on (or off) as you press this button. If not, return to Step 2 and try another code.

You can also press or to increase or decrease the four-digit code number.

18