Sunwave Tech 3815, SRC-3810 manual Troubleshooting Tables

Troubleshooting Tables

Macro does not work.	Be sure to aim the SRC-3810/3815 at the
	devices while the macro commands are
	being sent.
	Macro was not properly set up. Repeat
	macro set-up procedure (page 27).
IR LEARNING is not	Replace batteries in the SRC-3810/3815
successful.	and the remote you are trying to
	configure.
	Keep distance between remotes to
	about 2~4 inches.
	Do not learn near an incandescent lamp.
	Memory capacity is full (48 keys for each
	of 16 models).
	The learning process has no errors, but
	you still can’t control your AV devices:
	repeat the learning procedure again. If
	you still can’t solve the problem, use the
	debug code feature and email codes to
	SUNWAVE (page 24).
	Original remote might not be compatible
	with learning procedure.
A button of your	Some remotes issue multiple commands
existing remote	when a button is held down. Please be
performs two or more	sure to teach different buttons of SRC-
functions	3810/3815 for these different commands.
	Each button of SRC-3810/3815 can only
	learn one command.
The LCD screen turns	The SRC-3810/3815 is preset
off.	automatically to switch the LCD off after
	the Power Down time. Just tap the
	POWER button or Backlight button to turn
	the SRC-3810/3815 back on again. You
	can also reset the Power Down time
	period (page 38).

51