Code Menu
1.Press 
or 
to select debug.
2.Press 
.
3.Point the target device's remote control’s infrared eye at the SRC-3810/3815 learning eye located at the bottom of the unit (see Figure 1: Front View, Page3) and keep apart between 2~4 inches (5~10cm).
4.Select a device (for example TV).
The SRC-3810/3815 Touch Screen sequentially displays screens corresponding to first the hard keys, then page one of the soft keys, and finally page two of the soft keys. The blinking rectangle denotes the key being learned.
5.Press the corresponding button of the target device's remote control.
The SRC-3810/3815 screen displays an OK message if the code was successfully collected.
Press 
to toggle between hard key and soft key displays.
6.Press 
or 
to exit debug mode.
