Sunwave Tech 3815, SRC-3810 manual Selecting a Code Automatically

Code Menu

Note: Some codes are designed to operate more than one model. It may take several tries to find the code that works with your unit.

6.Press to confirm the selection and save the settings or click to exit.

Note: When you enter the Manufacture Code and an 'ERROR’ message is displayed, it could be for two reasons:

1.That code number doesn't exist in the Manufacture Code table yet.

2.That code number is not in the range of the Manufacture Code table reserved for the default device screen

Selecting a Code Automatically

1.Turn on the target device you want the SRC-3810/3815 to control.

2.Press the device hardware button (for example TV).

3.Point the SRC-3810/3815 at the target device.

Press the AUTO button. An “AUTO” message displays while the SRC-3810/3815 automatically cycles through the codes. Wait for the device to turn on and then press the POWER button or AUTO key to stop the automatic search.

The last tried code is displayed in the upper right-hand corner. Test this code by pressing the POWER button .

If it doesn't work, you may need to press the tuning down

key and try a few of the previously scanned codes.

4.Press to confirm the selection and save the settings or click to exit.

19