Troubleshooting Tables
Appendix C – Troubleshooting
Troubleshooting Tables
Problem | Solution |
LCD does not show | Batteries may be dead. Replace the |
anything when you touch | batteries with 4 new AAA Alkaline |
it or press the hardware | Batteries (page 5). Check that the |
buttons. | batteries are properly installed. |
The | Make sure that the desired device |
doesn’t operate a device. | screen on the |
| panel has been selected. |
| Move closer to the device. The |
| maximum operating distance is |
| approximately 30 feet. |
| Ensure that you are aiming the SRC- |
| 3810/3815 directly at the device and |
| that there are no obstructions |
| between the |
| device. |
| Ensure programming with the |
| learning function (page 20) or using |
| the manufacturer codes (page 18) |
| has been properly done. |
| the button. |
| In IR mode: |
| Move closer to the device. The |
| maximum operating distance is |
| approximately 30 feet. |
| Ensure that you are aiming the SRC- |
| 3810/3815 directly at the device and |
| that there are no obstructions |
| between |
|
|
49
