Edimax Technology IC-1520POE manual NOTE IP address will be reset to default value, Description

The descriptions of every setting in this menu will be given below:

Item	Description
Upgrade	If you downloaded latest firmware file from our
Firmware	website, you can click this button to start to upload
	the firmware file to the IP camera, and you’ll be
	prompted to provide the location of firmware file.
	Click ‘Open’ to start uploading new firmware and IP
	camera will start upgrading, please be patient. The
	IP camera will reboot after the upgrade procedure is
	done.
Reset to	Clear all settings in the camera. Please think again
Default	before you do this, and then click this button to
	reset all settings.
	NOTE: IP address will be reset to default value
	‘192.168.2.3’ also. You’ll need to change the IP
	address setting of your computer if the IP address
	of your computer does not begin with ‘192.168.2’,
	and subnet mask is not ‘255.255.255.0’, or you’ll
	not be able to connect to this IP camera again.
LED Light	Switch the LED light of this IP camera off, so ‘LAN’
OFF	and ‘WLAN’ LED on the IP camera will stop
	working, in case you don’t want other people know
	the camera is transferring data.
	You can click this button again to switch LED lights
	on again.

After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort and discard changes.

22