Edimax Technology IC-1520DPG manual Content, Check your package contents, Web Management Interface

Page 3

Content

Content

1.	Check your package contents		......................................................................... 1
	1.1.	System Requirement	2
2.	Hardware Installation		2
	2.1.	LED and Focusing	2
	2.2.	Installation Procedure	5
	2.3.	Locate the IP Address	6
3.	Web Management Interface		10
4.	Software Installation		13
	4.1 Firmware Upgrade		21

Image 3

Contents Digital Pan/Tilt Internet Camera Version 1.0 OctoberWire / Wireless / Power over Ethernet Quick Installation Guide=================================== Multi-Languages QIG on the CDHardware Installation ContentCheck your package contents 4.1 Firmware UpgradeLinux Open Source Code English„ One Antenna For IC-1520DPg Only 1. Check your package contentsStatus 2. Hardware Installation2.1. LED and Focusing 1.1. System Requirementy Power y LANy WLAN For IC-1520DPg only y Reset y AntennaThe Camera features two ports and a Reset button 2.2. Installation Procedure 2.3. Locate the IP Address 3. Right-click ‘Local Area Connection’, and click ‘Properties’ 2. Double-click ‘Network Connections’ icon4. Select ‘Internet Protocol TCP/IP’, then click ‘Properties’ Page 3. Web Management Interface When you’re prompted, click ‘Install’ to continue You should be able to see the image from camera now Note If you see one of these messages or both4. Software Installation Page 6. The system will install the program automatically 5. Click “Install” to start installing the program7. Click “Finish” to complete the software installation software, you may see the following or similar messagePage “N” means the camera is new and not Page Page 4.1 Firmware Upgrade of your computer does not begin with ‘192.168.2’ NOTE IP address will be reset to default valueaddress setting of your computer if the IP address ‘192.168.2.3’ also. You’ll need to change the IPEU Countries not intended for use SafetyR&TTE Compliance Statement EU Countries Intended for Use