Edimax Technology IC-1520DPG, IC-1520POE manual y Power, y LAN, y WLAN For IC-1520DPg only

Page 7
yPower

yPower

When the camera is power on and ready for access, the LED will light.

yLAN

When the Internet Camera is linking to wired network, the LED is lighting. The LED is flashing when video is transmitted or received through wired network.

yWLAN ( For IC-1520DPg only )

When the Internet Camera is linking to wireless network, the LED is lighting. The LED is flashing when video is transmitted or received through wireless network.

Wireless SMA Connector (IC-1520DPgl only)

LED Green:

LAN Activity

LED Amber: WLAN Activity (IC-1520DPgl only)

LED Blue:

Power On

Focus Ring

Model name

3

Image 7
Contents Digital Pan/Tilt Internet Camera Version 1.0 OctoberWire / Wireless / Power over Ethernet Quick Installation Guide=================================== Multi-Languages QIG on the CDHardware Installation ContentCheck your package contents 4.1 Firmware UpgradeLinux Open Source Code English„ One Antenna For IC-1520DPg Only 1. Check your package contentsStatus 2. Hardware Installation2.1. LED and Focusing 1.1. System Requirementy LAN y Powery WLAN For IC-1520DPg only y Antenna y ResetThe Camera features two ports and a Reset button 2.2. Installation Procedure 2.3. Locate the IP Address 3. Right-click ‘Local Area Connection’, and click ‘Properties’ 2. Double-click ‘Network Connections’ icon4. Select ‘Internet Protocol TCP/IP’, then click ‘Properties’ Page 3. Web Management Interface When you’re prompted, click ‘Install’ to continue You should be able to see the image from camera now Note If you see one of these messages or both4. Software Installation Page 6. The system will install the program automatically 5. Click “Install” to start installing the program7. Click “Finish” to complete the software installation software, you may see the following or similar messagePage “N” means the camera is new and not Page Page 4.1 Firmware Upgrade of your computer does not begin with ‘192.168.2’ NOTE IP address will be reset to default valueaddress setting of your computer if the IP address ‘192.168.2.3’ also. You’ll need to change the IPEU Countries not intended for use SafetyR&TTE Compliance Statement EU Countries Intended for Use