The Camera features two ports and a Reset button.
yAntenna
Standard reverse SMA connector where any antennas with reverse SMA connector can connect to the Internet Camera.
yPower
The Power jack is where you can connect the power adapter.
yLAN
The LAN jack is where you can connect the Ethernet network cable.
yReset
1.If problems occur with your Internet Camera, press the reset button with a pencil tip (for less than 2 seconds) and the Internet Camera will reboot itself with your configurations.
2.If problems persist or you experience extreme problems or you forgot your password, press the reset button for longer than 5 seconds. The Internet Camera will reset itself to the factory default settings (warning: your original configurations will be replaced with the factory default settings).
Power Jack
LAN Port
Reset Button
4